28English55 Reinstall the water supply tank and close the cover.Confirm the click.66 Remove the water from the appliance by pressing thedrain button.Return the appliance to a flat position and repeat the steps above 2 to 3times to ensure that all water is completely drained from the appliance.77 Repeat the steps 1 to 6 above 2 to 3 times.88 Wipe off any water from the appliance.Even after draining the water, some water remains in the appliance.This does not cause sanitary problems since the water is boiled whenused the next time.Cleaning the ion steamerDo not wash or soak the appliance in water.Wipe the appliance with a cloth moistened with soapy water. Never usealcohol, thinner, benzine, or enamel remover. Doing so may result inmalfunction or cause cracks or discoloration.Cleaning the filterClean once a year.Vacuum dust from the filter with an electric vacuum cleaner.Cleaning the cool mist outlet(When the cool mist is not released smoothly)Turn off the power, remove the cap from the attached cleaning needle,and then clean the cool mist outlet with a needle. (Put the needle straightin and out of the hole 2 to 3 times.)Forcefully pushing the needle may deform it. After cleaning, put the cap onthe needle and carefully store it together with the operating instructions.Do not use any items other than the attached cleaning needle (e.g., asewing needle). Doing so may result in a malfunction.Lightly wipe the parts around the cool mist outlet with a cotton swab toprevent damage.Do not insert any foreign substances, such as a hairpin, into the outlet orthe filter.●●●●●●(+B&+LQGE