7 EnglishPartsidentification(Fig.1)A Main body1 Heater cover2 Rotating comb3 Power switch [0/1]/Rotation switch [ ]4 Battery cover5 Ready markB Protective capC Cleaning brushInstallingorreplacingthebattery• Make sure the power switch is in the “0” position.1. Rotate the battery cover in the direction of thearrow, and align the marks. (Fig. 2)2. Remove the battery cover. (Fig. 3)3. Insert the battery. (Fig. 4)• Be careful to insert the battery with + and ‑correctly oriented.4. Rotate the battery cover in the direction of thearrow, and align the marks. (Fig. 5)