Displaying PC Screen on TV49Displaying PC Screen on TVThe screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.● To connect PC (p. 83)Display the screen of the PCPC● Corresponding signals (p. 92)● If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported.PC menu setting● To make settings “How to Use Menu Functions” (p. 31)Menu Item Adjustments / Configurations (alternatives)SetupPC SetupInput ResolutionSwitches to a wide view:VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1,024 × 768 pixels) /WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)● Options change depending on signalsClock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock PhaseEliminates flicker and distortion● Adjust after Clock adjustment● Set to the minimum level if noise occursSyncPC sync signal type [H & V] / [SOG][H & V]: by the horizontal and vertical signals from your PC[SOG]: Sync on Green sync from your PCReset PC Settings Press the OK button to reset [PC Setup] to the default settingsDVI Position SettingsH-pos Adjusts horizontal position settings of DVIV-pos Adjusts vertical position settings of DVIReset DVI PositionSettings Press the OK button to reset [DVI Position Settings] to the default settings● Other items (p. 32 - 38, 50)Note● For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMIcable (p. 90).