Panasonic Diga DMR-PWT420 Operating Instructions Manual

Also see for Diga DMR-PWT420: Operating instructions

Contents

VQT4E9022Getting startedSettingsWhen you experience problemsRefer to “When you experience problems withEasy Network Setting”. (> 94)To restart Easy Network Setting1 Press [SETUP]. (> 18)2 Select “Easy Network Setting” in “Network”,then press [OK].To redo settings individuallyIf “Easy Network Setting” did not work properly orwhen you change the settings individually,perform the following steps:1 Press [SETUP]. (> 18)2 Select “Network Settings” in “Network”, thenpress [OK].3 Refer to “Network Settings”. (> 80)Check security before using Home NetworkfunctionIf you set “Home Network function” to “On”, allconnected devices on the same network canaccess this unit. Ensure that the router for yourhome network has adequate security system toprevent unauthorized access.• Refer to the operating instructions of the hub or router.• Home Network function setting can be set only when youselected “Off” for “Power Save in Standby” in “EasySetting”. (> 20, step 6)• Even if you set “Home Network function” to “Off”, it ispossible to set to “On” later. (> 70, 81)• Do not use this unit to connect to any wireless network forwhich you do not have usage rights.During automatic searches in a wireless networkenvironment, wireless networks (SSID) for which you donot have usage rights may be displayed; however, usingthese networks may be regarded as illegal access.• After performing network settings on this unit, the settings(encryption level, etc.) of the Wireless router might change.When you have trouble getting online on your PC, performthe network settings on your PC in accordance with thesettings of Wireless router.• Please be aware that connecting to a network withoutencryption may result in the content of the communicationbeing illegitimately viewed by a third party, or the leaking ofdata such as personal or secret information.