Panasonic Diga DMR-E85H Operating Instructions Manual

Also see for DIGA DMR-E85H: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

41RQT7462Convenient functionsYou can restart auto channel setting if Auto-Setup (➡ page 9) fails forsome reason.4 Press [3, 4] to select “Auto-SetupRestart” and press [ENTER].The confirmation screen appears.5 Press [2, 1] to select “Yes” andpress [ENTER].The country setting menu appears.6 Press [2, 1] to select the country andpress [ENTER].Auto-Setup starts.To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].List of TV Reception ChannelsChange the settings to match the equipment you are connectingwith, or to match the title when there are both PAL and NTSC titleson the HDD.1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select “SETUP”and press [ENTER].3 Press [3, 4] to select “Connection”and press [1].4 Press [3, 4] to select “TV System”and press [ENTER].5 Press [3, 4] to select the TV systemand press [ENTER].≥PAL (factory preset)–Select when connecting to a PAL or Multi-systemtelevision. Titles recorded using NTSC are played as PAL60.–Select to record television programmes and PAL input fromother equipment.–[HDD] Select when playing a PAL input title recorded on theHDD.≥NTSC–Select when connecting to a NTSC television. Televisionprogrammes cannot be recorded properly.–Select to record NTSC input from other equipment.–[HDD] Select when playing a NTSC input title recorded onthe HDD.6 Press [2, 1] to select “Yes” andpress [ENTER].To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].∫ To change the setting all at once (PAL!#NTSC)While stopped, keep pressing [∫] and [< OPEN/CLOSE] on themain unit for 5 or more seconds.Auto-Setup RestartCountry VHF UHF CATVAustralia 0–12 28–69 45–470 MHzNew Zealand 1–11 21–69 44–470 MHzTV SystemSETUPOthersDiscPictureSoundDisplayTuningTV SystemPALNTSCConnectionSELECTENTERRETURN