TroubleshootingVQT2J6987U72U73¾ The HDMI connection acts unusually.– The connected equipment is not HDMI compatible.– Please use HDMI cables that have the HDMI logo (asshown on the cover).– The HDMI cable is damaged.U76¾ HDMI cannot be output because you are connected to amodel that does not support copyright protection.U77¾ Due to the current disc not having authorised copyrightinformation, video output is not performed.U88¾ (When a disc is inserted) Displays when there wassomething unusual detected with the disc whilerecording, playback or copy. This is displayed when theunit is in the recovery process to return to normaloperation. Once the display clears you can use the unitagain. (> 88)If it remains displayed, consult the dealer where the unitwas purchased.U99¾ The unit fails to operate properly. Press [Í/I] on the mainunit to switch the unit to standby mode. Now press [Í/I]on the main unit again to turn the unit on.H or F(“∑” stands for a number.)¾ There is something unusual. (The service numberdisplayed after H and F depends on the unit’s condition.)¾ Check the unit using the troubleshooting guide. If theservice number does not disappear, do the following.(> 88–93)1. Disconnect the plug from the household mains socket,wait a few seconds, then reconnect it.2. Press [Í/I] to turn the power on. (The unit may be fixed.)If the service number does not disappear despite after doingthe above, request service from the dealer. Inform the dealerof the service number when requesting service.X HOLD¾ The HOLD function is activated.Press and hold [OK] and [RETURN ] at the same timeuntil “X HOLD” disappears. (> 85)
