Panasonic DVD-LS90 Operating Instructions Manual

Also see for DVDLS85: Operating instructions

Panasonic DVD-LS90 Operating Instructions Manual Manual pdf 10 page image

10RQT8071Useful functionsRepeat play (Only when the elapsed play time can be displayed.For JPEG, you can use even if there is no elapsed time display.)To repeat a specified section (A-B Repeat)Except [JPEG] and [RAM] [DVD-RW[‹VR›] (still picture part)Changing play speed [RAM] [DVD-RW[‹VR›] [DVD-V]Enjoying virtual surround (Advanced Surround)[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] (2 or more channels)A surround sound effect can be made using 2 speakers (on other equipment).≥ When using headphones, press to select “HP 1 Natural” or “HP 2 Enhanced”.≥ When using discs recorded with surround sound, sound seems to come from speakers on eitherside of you.≥ Optimum seating position is 3 to 4 times the distance between the front left and right speakers or thewidth of the television if using the television’s speakers.≥ Do not use in combination with surround effects on other equipment.≥ To exit the screen : Press [RETURN].Press several times to select the content torepeat.≥To exit the screen : Press [RETURN].Repeat OffMenuENTERENTER A-B RepeatMenuDISPLAYDISPLAY1 2Press once.1 Press [34] to selectOther Settings.2 Press [1] to go to the nextmenu and [34] to select“Play Menu”.3 Press [1] to go to the nextmenu and [34] to select“A-B Repeat”.4 Press [ENTER] at the startingand ending points.≥ Press [ENTER] again to cancel.≥ To exit the screen : Press [RETURN].ENTERENTERDISPLAYDISPLAY1 2 1 Press [34] to select Other Settings.2 Press [1] to go to the next menu and [34] toselect “Play Speed”.3 Press [ENTER] and [34] to select“Normal” or “k0.6” to “k1.4” (in 0.1 units).4 Press [ENTER].≥ Press [1] (PLAY) to return to normal play.≥ After you change the speed– Advanced Surround (➜ below) and Multi Re-master (➜ page 12) do not work.– Digital output switches to PCM-2ch.– 96 kHz sampling frequency is converted to 48 kHz.≥ This may not work depending on the disc’s recording.≥ To exit the screen : Press [RETURN].Press once.A.SURROUNDA.SURROUNDPress to select “SP 1 Natural” or “SP 2 Enhanced”.Useful functions