20RQT8791Enjoying in a carEnjoying video in the back seat with the Headrest Mounting BracketYou can enjoy video in the back seat attaching the unit to the back of the front seat.≥ Please insert the disc before attaching the unit to the headrest bracket.1 Attaching the headrest bracket to the front seat.2 Adjusting the monitor.≥ Do not attach or detach while driving, and do not attach in the following locations,otherwise it may result in injury or traffic accidents:–anywhere other than the back of the seat–in a location that interferes with the driver’s view or operation of the car–in a location that interferes with the operation of an airbag–in a location that interferes with the driving instruments≥ Make sure that the bracket belt is securely fastened, and check the lock on the unit.In the event of an accident, sudden acceleration, or braking, the unit could become loose andcause injury.1 Fold the monitor down towards the frontof the unit.2 Rotate the monitor backwards so thescreen is facing out.DO DO NOTSide viewHeadrest MountingBracket (included)2 Close the buckle and adjust the beltuntil it fits tightly around the headrest.1 Adjust the headrest so there is an openspace of about 3 cm.Attach to the seat sothat the label side ofthe bracket can beseen from the rearof the seat.If this space islarger than 3 cmthe unit couldbecome looseand cause injuryin the event ofan accident etc.Enjoying in a car