Panasonic DVD-F87 Operating Instructions Manual

Also see for DVD-F84: Operating instructions Operating instructions

Contents

Panasonic DVD-F87 Operating Instructions Manual Manual pdf 7 page image

RQT72927Changer functionsPress Disc select buttons.1 Press [DISC] to show the Disc information menu.2 Press the numbered buttons ([DISC1] – [DISC5]).To clear the screenPress [DISC].While the drawer is closedPress [DISC SKIP].Each time you press the button, the carousel moves clockwise by onetray.1 Press [<OPEN/CLOSE] to open the drawer.2 Press [DISC SKIP].The carousel moves one tray clockwise and each subsequent pressmoves it two trays in alternate directions.1 Press [DISC EXCHANGE].The drawer opens and the disc in the play position comes to the front-left position.2 Change the disc in the front-left position.3 Press [DISC EXCHANGE].[VCD] [CD] [WMA] [MP3]Press [CD MODE] to play all loaded discs (except for DVDsand JPEG files).(CD Mode button on the main unit lights on.)≥HighMAT menus and Video CD playback control are disabled.≥You cannot change the mode during program or random play.≥CD Mode turns off when you switch the unit to standby.Disc selectionSelecting the disc directlySelecting the disc from the Disc information menuSkipping to the next disc trayChanging discsChanging the other discs without interrupting playExchanging the discs in the play positionSequential play (CD Mode)DISC1 2 34 5DISC SKIPDISC SELECT(Main unit)Disc information12345DVD-VideoCDUncheckedDVD-AudioNo DiscNot yet readEmptyDISC EXCHANGEDISC SKIP(Main unit)CD MODEEnjoying higher quality audio and videoBy pressing just one button the disc type is automatically determined andthe best audio and video settings are configured.Press [AV ENHANCER] to select “On”.[RAM] [DVD-V] (Discs recorded with 48 kHz only)[DVD-A] (Discs recorded with 44.1 kHz and 48 kHz only)[VCD] [CD]≥ During 2ch output of these discs, this feature gives you a more naturalsound by adding the higher frequency signals not recorded on the disc.≥ During multi-channel output of these discs, this feature reproduces thefrequencies lost during recording to give you a sound closer to theoriginal.[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz, 32 kHz)This feature reproduces the higher frequencies lost during recording togive you a sound closer to the original.Press [MULTI RE-MASTER] to select “1”“2” or “3”.≥ The actual output sampling frequency depends on “PCM Digital Output”setting in “Audio” tab (➜ page 12).Dolby Pro Logic II is an advanced decoder that derives 5 channelsurround (Left and Right Front, Center, Left and Right Surround) from anystereo program material, whether or not it has been specifically DolbySurround encoded.Press [ÎPRO LOGICII].Movie: Movie software, recorded in Dolby Surround.Music: Stereo sources.≥ This does not work when playing multi-channel audio.You can enjoy higher quality audio by stopping the video output.During playPress [AUDIO ONLY].≥AUDIO ONLY is canceled if you press [AUDIO ONLY] again or switch theunit to standby.≥There is output to the screen only when:—the disc is stopped.—performing operations such as searching.—on screen display is displayed.AV EnhancerWhen AV Enhancer is on, you cannot change the settings indicatedbelow.Audio settings:Multi Re-master (➜ below), Dolby Pro Logic II (➜ below), AdvancedSurround (➜ page 11), Dialogue Enhancer (➜ page 11)Video settings:Picture Mode (➜ page 10)Multi Re-masterSetting [DVD-A] [DVD-V] [CD] (LPCM/PPCM)Type of musicOther discsEffect level1 High tempo (e.g., pop and rock) Light2 Various tempos (e.g., jazz) Medium3 Low tempo (e.g., classical) StrongOff Off Off[DVD-F87]only]Dolby Pro Logic IITo enjoy even higher quality sound—AUDIO ONLYThe above indicated features may not work depending on the discsrecording.AV ENHANCERMenuAV Enhancer OnMULTIRE-MASTERMenuMulti Re-master 1ÎPRO LOGIC(Main unit)AUDIO ONLYChanger functions/ Enjoying higher quality audio and videoDownloaded From Disc-Player.com Panasonic Manuals