RQT72922For the U.S.A. and CanadaTHE FOLLOWING APPLIES ONLY IN THE U.S.A.THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADARead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listedbelow. Keep these operating instructions handy for future reference.1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance with themanufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-typeplug. A polarized plug has two blades with one wider than the other. Agrounding-type plug has two blades and a third grounding prong. Thewide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularlyat plugs, convenience receptacles, and the point where they exit fromthe apparatus.11) Only use attachments/accessories specified by themanufacturer.12) Use only with the cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with theapparatus. When a cart is used, use caution whenmoving the cart/apparatus combination to avoidinjury from tip-over.13) Unplug this apparatus during lightning storms or when unused forlong periods of time.14) Refer all servicing to qualified service personnel. Servicing is requiredwhen the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has been exposed torain or moisture, does not operate normally, or has been dropped.CAUTION!THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUSRADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIRYOURSELF. REFER SERVICING TO QUALIFIEDPERSONNEL.WARNING:TO REDUCE THE RISK OF FIRE, ELECTRICSHOCK OR PRODUCT DAMAGE, DO NOTEXPOSE THIS APPARATUS TO RAIN,MOISTURE, DRIPPING OR SPLASHING ANDTHAT NO OBJECTS FILLED WITH LIQUIDS,SUCH AS VASES, SHALL BE PLACED ON THEAPPARATUS.CAUTION!≥ DO NOT INSTALL OR PLACE THIS UNIT IN ABOOKCASE, BUILT-IN CABINET OR IN ANOTHERCONFINED SPACE. ENSURE THE UNIT IS WELLVENTILATED. TO PREVENT RISK OF ELECTRIC SHOCKOR FIRE HAZARD DUE TO OVERHEATING, ENSURETHAT CURTAINS AND ANY OTHER MATERIALS DO NOTOBSTRUCT THE VENTILATION VENTS.≥ DO NOT OBSTRUCT THE UNIT’S VENTILATIONOPENINGS WITH NEWSPAPERS, TABLECLOTHS,CURTAINS, AND SIMILAR ITEMS.≥ DO NOT PLACE SOURCES OF NAKED FLAMES, SUCHAS LIGHTED CANDLES, ON THE UNIT.≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLYFRIENDLY MANNER.CAUTION:TO PREVENT ELECTRIC SHOCK MATCHWIDE BLADE OF PLUG TO WIDE SLOT,FULLY INSERT.Before moving the unit, ensure the disc trays are empty.Failure to do so will risk severely damaging the discs and the unit.CAUTION:This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures:≥Reorient or relocate the receiving antenna.≥Increase the separation between the equipment and receiver.≥Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.≥Consult the dealer or an experienced radio/TV technician for help.Any unauthorized changes or modifications to this equipment wouldvoid the user’s authority to operate this device.This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.The lightning flash with arrowheadsymbol, within an equilateral triangle, isintended to alert the user to the presenceof uninsulated “dangerous voltage” withinthe product’s enclosure that may be ofsufficient magnitude to constitute a risk ofelectric shock to persons.CAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.The exclamation point within anequilateral triangle is intended to alert theuser to the presence of importantoperating and maintenance (servicing)instructions in the literature accompanyingthe appliance.RISK OF ELECTRIC SHOCKDO NOT OPENThe lightning flash with arrowheadsymbol, within an equilateral triangle, isintended to alert the user to the presenceof uninsulated “dangerous voltage” withinthe product’s enclosure that may be ofsufficient magnitude to constitute a risk ofelectric shock to persons.CAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.The exclamation point within anequilateral triangle is intended to alert theuser to the presence of importantoperating and maintenance (servicing)instructions in the literature accompanyingthe appliance.RISK OF ELECTRIC SHOCKDO NOT OPENIMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS