Chapter 1 Getting To Know Your Machine104 Select the location or destination. Scan to SD Memory Card/USB FlashMemory/Internal Hard Disk Drivez The scanned image(s) cannot be saved tothe SD Memory Card or USB Flash Memoryif the setting of Function Parameter “70 SD/USB Memory Function” (General Settings> Key Operator Mode) is set to “No”.For more details on this setting, refer toGeneral Settings in the OperatingInstructions (For Function Parameters) ofprovided CD-ROM.z The scanned image(s) cannot be saved tothe internal Hard Disk Drive if the setting ofFunction Parameter “02 Scan to HDFunction” (Scanner Settings > KeyOperator Mode) is set to “No”.For more details on this setting, refer toScanner Settings in the OperatingInstructions (For Function Parameters) ofprovided CD-ROM. Transfer Scanned Image to:5 Press the Start key.z When scanning from the Platen Glass, placethe next original, and then follow theinstructions described on the Touch PanelDisplay.The scanned image(s) is transferred to the SDMemory Card, USB Flash Memory, PC, orEmail.z When cancelling the operation, press the Stop keyon the Control Panel, and then follow theinstructions described on the Touch Panel Display.SD MemoryCard or USBFlash MemorySelect “SD Card / Hard Drive”,and then select “SD Card” or“USB Flash Memory”.z Refer to Scan to the SDMemory Card (see page 13).z Refer to Scan to the USBFlash Memory (see page16).Internal HardDisk DriveSelect “SD Card / Hard Drive”,and then select an Image Box.z Refer to Scan to the InternalHard Disk Drive (see page19).Scan to aComputerWhen a desired destination isselected from the AddressBook, a reception noticeappears on the destination.z Refer to Scan to a Computer(see page 22).Scan to Email Select “Email”, and then selectthe desired destination.z Refer to Scan to Email (seepage 24).