Panasonic DP-8020E Operating Instructions Manual

Contents

60Function00 PRINTER SETTINGS Prints the printer settings.PRESS SET TO PRINT01 COMPLETION TIME Sets the job completion time setting. 180SEC1-999SEC02 PAGE PROTECTION Selects whether to enable automatic 1:OFFcompression when the received data exceedsthe page memory capacity.(This is accomplished by reducing resolution,and/or deleting pixels to fit the data onto theavailable page memory, then print it out.)When the setting is in the "OFF" position, uponexceeding the page memory capacity, the printjob is deleted and an Error message is displayed.1:OFF / 2:ON03 ERROR PAGE PRINT Selects whether to print the error page. 2:ON1:OFF / 2:ON04 SPOOL FUNCTION Selects whether to enable the spool function. 2:ON1:OFF / 2:ON05 TEXT PRINT Selects whether to print the text page only. 2:ON1:OFF / 2:ON06 PS CONFIGURATION∗1 Prints the PS configuration page.PRESS SET TO PRINT07 FONT LIST PRINT (PCL)∗2 Prints the PCL font list.PRESS SET TO PRINT08 FONT LIST PRINT (PS)∗1 Prints the PS font list.PRESS SET TO PRINT09 MAILBOX DATA HOLD∗3 Selects the automatic holding time frame for the 7 DAYSmailbox data.Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /5 DAYS / 6 DAYS / 7 DAYS10 DELETE MAILBOX∗3 Selects whether to delete All the mailbox data oronly the data Before the time frame selected inthe "09 Mailbox Data Hold" setting.1:ALL / 2:BEFORE11 PRINT QUEUE DEL Selects whether to disable the Key Operator's 2:KEY OP.Password (authorization) requirement to deletethe print queue.1:FREE / 2:KEY OP. (Operator)12 APPLETALK ZONE∗1 Inputs a AppleTalk zone name.The following Parameter Settings require the input of the Key Operator Password:■ Printer Settings (For Key Operator)No. Modes Function InitialSetting∗1 Available only when the optional Multi Page Description Language Controller Module is installed.∗2 Available only when the optional Printer Controller Module is installed.∗3 Available only when the optional Hard Disk Drive Unit is installed.Downloaded From ManualsPrinter.com Manuals