Panasonic DMRBW880 Operating Instructions Manual

Also see for Diga DMR-BW880: Operating instructions Operating instructions Operating instructions

Contents

Convenient functionsVQT2J7081¾ Deep Colour OutputThis setting is for selecting whether to use Deep Colouroutput when a TV that supports Deep Colour isconnected.¾ HDMI Audio OutputSelect “Off” when connected to a TV with an HDMIcable, and connected to an amplifier not compatiblewith HDMI with a DIGITAL AUDIO OUT terminal¾ 7.1ch Audio Reformatting[BD-V]Surround sound with 6.1 ch or less is automaticallyexpanded and played back at 7.1 ch.≥If “Off” is selected, sound is played over the originalnumber of channels. (Note that in the case of 6.1 chaudio, playback will be at 5.1 ch)Audio reformatting is enabled in the following cases:– When you have selected “PCM” in “Digital AudioOutput”.– When the audio is Dolby Digital, Dolby Digital Plus,Dolby TrueHD or LPCM.¾ Contents Type FlagDepending on the playback content, the TV will outputadjusting to the optimal method when a TV thatsupports Contents Type Flag is connected.¾ VIERA LinkSet to use “HDAVI Control” function when connectedwith an HDMI cable to a device that supports “HDAVIControl”.≥Select “Off” when you do not want to use “HDAVIControl”.∫ Component ResolutionThis sets the video output resolution when using thecomponent video terminal.≥You cannot change the setting while the “HDMI VideoMode” is set to “On”.Set the “HDMI Video Mode” to “Off”.≥If it is set to “720p”, images other than “720p” will be outputas “1080i”.≥Even if you select “720p” or “1080i”, the video outputresolution is restricted to “576p/480p” when HD contentsrecorded on this unit, DVD-Video discs, DivX and BD-Video discs recorded at a rate of 50 field per second andimages via AV1, AV2 or DV input are output from theCOMPONENT VIDEO OUT terminals.∫ Network Easy SettingsPress [OK] to start Network Easy Settings. (> 19)∫ Network Settings¾ IP Address / DNS SettingsCheck the connection of the network or set the IPaddress and DNS.≥Press [OK] to show the respective setting.¾ Proxy Server SettingsCheck and set the connection to the Proxy server.≥Press [OK] to show the respective setting.¾ Internet Content Settings¾ LockYou can restrict using VIERA CAST.≥Follow the on-screen instructions.≥PIN is required to change. (> 74)¾ Automatic Volume ControlVolume that is different depending on the contents isadjusted automatically to the standard volume whileusing the VIERA CAST.≥Depending on contents, this function will not work.≥Select “Off” when the audio is warped.¾ Home Network ( DLNA ) SettingsYou can set the DLNA function (> 67)It is also possible to change the name of this unit on thenetwork.Network≥ “Connection Speed Setting" is enabled only when “ConnectionSpeed Auto-configure” is turned “Off”.