Menu
Panasonic DMR-HWT260 Operating Instructions Manual
                                                                            |
Getting startedSQT133212To stop partwayPress [RETURN ].To restart setup (> 57, Auto Setup)• If tuning is cancelled partway through, it may not bepossible to receive the channels. Restart setup again.Easy Network SettingAfter completing “Easy Setting”, you can continuewith “Easy Network Setting”.Select “Wired” or “Wireless”, then press [OK].LAN cable connection (“Wired”)Follow the on-screen instructions to apply yourconnection settings.Wireless LAN connection (“Wireless”)Before beginning wireless connection setup• Obtain your network name (SSID§1 ).• If your wireless connection is encrypted, pleasebe sure that you know your encryption key.• The default SSID,Password (Key) etc., maybe printed on the router.Select “Search for wireless network” or “WPS(PUSH button)” and press [OK], then follow theon-screen instructions and apply the settings.Search for wireless network:The available wireless networks will be displayed.Select your network name and press [OK].- If your Network name is not displayed, searchagain by pressing the red button on the remotecontrol.- Stealth SSID§2 will not be displayed. Entermanually by using “Wireless Settings”. (> 61)• If your wireless network is encrypted, EncryptionKey Input Screen will be displayed.Input the encryption key of your network.WPS (PUSH button):If your Wireless router supports WPS (PUSHbutton), you can easily perform the settings bypressing WPS button on it.WPS (Wi-Fi Protected Setup™) is a standard thatfacilitates settings relating to the connection andsecurity of wireless LAN devices.1 Press WPS button or corresponding button ofWireless router until the lamp starts flashing.• For details, refer to the operating instructionsof Wireless router.2 Press [OK].§1 SSID:An SSID (Service Set IDentification) is a name used bywireless LAN to identify a particular network.Transmission is possible if the SSID matches for bothdevices.§2 Depending on the settings of the wireless router, its SSIDmay not be found. For details, refer to the operatinginstructions for the wireless router.§3 The wireless router compatible with Wi-Fi ProtectedSetupTM may have the mark.Easy Network SettingEasy Network SettingSettings and tests for connection requiredfor home network and the Internet will beconducted.First, please select a connection mode.LAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Select “Wireless”.Current setting : WiredWiredWirelessSSID XXXXXXXXXXXXKEY XXXXXXXXXXXXPIN XXXXXXXXXe.g.,3e.g.,Wirelessrouter |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved