Menu
Panasonic DMR-ES36V Operating Instructions Manual
Also see for DMR-ES36V: Setup guide
                                                                        |
17RQT8977∫ If the clock is an hour slower or faster than the actualtimeSelect “j1” or “i1” in “Adjust Time Zone” in the Setup menu (l 58).Signal source, RF output channel, channel caption revert to thedefault values when you perform the procedure below.Scheduled recording settings are also cleared.When the unit is on and stopped[1] Press and hold [CH, W] and [CH, X] on the mainunit for about 5 seconds.The unit turns off.[2] Press [Í, DVD/VHS POWER] to turn the unit on.Plug-in Auto Tuning starts.[1] While stoppedPress [FUNCTIONS].[2] Select “Other Functions” with [3, 4] and press[ENTER].[3] Select “Setup” with [3, 4] and press [ENTER].[4] Select “Channel” with [3, 4] and press [2, 1].[5] Select “Signal Source (RF IN)” with [3, 4] andpress [ENTER].[6] Select “Antenna” or “Cable TV” with [3, 4] andpress [ENTER].[7] Select “Set Channels Automatically” with [3, 4]and press [ENTER].[8] Press [ENTER].≥Auto Channel Setting starts. This takes a few minutes.[9] Press [ENTER].∫ To cancel in the middlePress [RETURN].∫ To exit the screenPress [RETURN].Add or delete channels if necessary channels are not set orunnecessary channels are set.[1] Press the numeric buttons to select a channel.Antenna Mode (Airwaves)e.g., “5”: [0] )[5]“15”: [1] )[5]CableTV Mode (Cable)e.g., “5”: [0] )[0] )[5]“15”: [0] )[1] )[5]“115”: [1] )[1] )[5]≥You can also use [CH, W, X] to select a channel.[2] Press [CH, ADD/DLT].e.g., The channel is deleted.“Clock Settings” made here are applied to VHS as well.[1] While stoppedPress [FUNCTIONS].[2] Select “Other Functions” with [3, 4] and press[ENTER].[3] Select “Setup” with [3, 4] and press [ENTER].[4] Select “Setup” with [3, 4] and press [2, 1].[5] Select “Clock Settings” with [3, 4] and press[ENTER].[6] Select “Set Clock Manually” with [3, 4] andpress [ENTER].[7] Use [2, 1] to select the item you want tochange, and press [3, 4] to change the setting.≥DST (Daylight Saving Time): On or OffIf you select “On”, the clock is advanced one hour starting at2 a.m. on the first Sunday in April and ending at 2 a.m. on thelast Sunday in October.≥Time Zone (l 20)[8] Press [ENTER].≥The clock starts.≥When you change the time zone, the recording times for titlesrecorded before the time zone adjustment also change tocorrespond to the new time zone.∫ To return to the previous screenPress [RETURN].∫ Restart Plug-in Auto Tuning(after relocation, for example)∫ Restart Set Channels AutomaticallyNo DiscFUNCTIONS No DiscProgramCopyOther FunctionsENTERRETURNNo DiscFUNCTIONS No DiscProgramCopyOther FunctionsSetupENTERRETURNManual Channel CaptionsSignal Source (RF IN)ChannelSetupDiscVideoAudioDisplaySet Channels AutomaticallyChannel CaptionsPreset Channel CaptionsAntennaSetupAntennaChannelSetupDiscCable TVSignal Source (RF IN)Setup∫ Adding and deleting channels∫ Set Clock ManuallyThe unit’s displayChannel 15 DeletedOff TimerChannelSetupDiscVideoAudioDisplayTV ScreenRemote Control CodeClock Settings6 HoursSet Code 1Quick StartRestore Default SettingsOnSetupVHSSet Clock Manually/ :/ SAT PMMonth Day Year Hour Minute1 1 12 002000DST Time ZoneOff ESTENTERSTEP 2 Plug-in Auto Tuning |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved