Panasonic DMR-E50K Operating Instructions Manual

Also see for Diga DMR-E50: Operating instructions Operating instructions Operating instructions

Contents

10RQT6920Setting upChange the settings if your television is:≥Widescreen (16:9 aspect ratio)≥Progressive– Read your television’s operating instructions for details.1 Press [SETUP] to show the menus.2 Press [3, 4] to select “TV Screen”and press [1].3 Press [3, 4] to select “TV Type” andpress [ENTER].4 Press [3, 4] to select the item andpress [ENTER].≥If you select a progressive output (480P) item, select Videoin the on-screen menu and set “Transfer” to suit the material(➜page 38).To return to the previous screenPress [RETURN].When you are finishedPress [SETUP].∫ Regarding Progressive Television PictureProgressive image aspect (height to width ratio) is set at a standard16:9. DVD-Video which has been set at 16:9 will be displayed cor-rectly. However, 4:3 video material will be stretched to the right andleft when displayed.≥To view the picture at the right aspect– For televisions that allow the aspect of progressive images tobe adjusted, use the function provided on the television andadjust as necessary.– For televisions which do not allow the aspect of progressiveimages to be adjusted, please set “Progressive” to “OFF” (➜page 38).[Note]≥If the unit is connected to the TV through VIDEO OUT or S-VIDEO OUT, output will be interlace only (even if you select pro-gressive output).≥When progressive output is on, closed captions can not be dis-played.You can control televisions by entering the remote control code.Press and hold [Í, POWER TV] and enter thetwo-digit code with the numbered buttons.e.g., 01: press [0] ➜ [1].Code No. and Manufacturer≥Test by turning on the television and changing channels. Repeatthe procedure until you find the code that allows correct operation.[Note]If your television brand is not listed or if the code listed for your tele-vision does not allow control of your television, this remote controlis not compatible with your television.∫ OperationPoint the remote control at the television.OPEN/CLOSESETUPERASE F Rec POSITION MEMORY MARKERAUDIO INPUT SELECTCM SKIPSTATUS FRAMEDISPLAYSTOPPAUSEPLAY/a1.3DVDVCR Plus+ TV/VIDEO REC MODE RECCHVOLUMETVTVDVD1 2 37 8 90 1004 5 6SLOW/SEARCHSKIPDIRECT NAVIGATORTOPMENUMENURETURNFUNCTIONSPROG/CHECK TIME SLIPADD/DLTENTERPLAY LISTCANCELPOWERÍ ÍSETUPÍ, POWER TVDVD, TVW, X, CHr, s, VOLUMERETURNTV/VIDEO3, 4, 2, 1ENTERNumberedbuttonsTAB SELECTAntenna SystemAuto Channel SettingChannel CaptionPreset Channel CaptionManual Channel CaptionVCR Plusi CH SettingCATVChannelSETUPRETURNSet UpDiscVideoAudioDisplayTV ScreenTABSELECT4:3 TV Settings for DVD-VideoTV mode(4:3)LetterboxPan&ScanSETUPRETURNSet UpDiscVideoAudioDisplayTV Screen4:3 TV Settings for DVD-RAMTV TypeENTERChannel4:3 (480I)SETUPSet UpDiscVideoTV TypeAspect 4:3 & 480IAspect 4:3 & 480PChannelAspect 16:9 & 480PAspect 16:9 & 480ITelevision operation01 Panasonic/National QUASAR 11 JVC02 12 HITACHI03 MAGNAVOX SYLVANIAPHILIPS (RC-5) 13 MITSUBISHI04 ZENITH 14 SAMSUNG05 THOMSON RCA GE 15GOLDSTAR/LG06 SHARP 1607 1708 SONY 18 SAMSUNG09 TOSHIBA 1910 SANYO FISHER –Operation ButtonOn and off [Í, POWER TV]Video input mode [TV/VIDEO]Channels(Switch [DVD, TV] to “TV”.)[W, X, CH] orNumbered buttonse.g., Channel “5”: [0] ➜ [5]Volume [r, s, VOLUME]STEP 5 Set up to match your television