Convenient functionsVQT4C68 95Other operationsPreparation• Show the “Enter Title Name” screen, etc.1 Select a character, then press [OK].Repeat this step to enter other characters.• To delete a character:Select the character in the name field, thenpress [PAUSE ;].• To enter characters with number buttons:e.g., entering the letter “R”2 Press [STOP ∫] (Set).“Writing...” appears then the screen returnsto the previous screen and so on.To end partwayPress [RETURN ]. (Text is not added.)• The maximum number of characters depends on themedia.• If a name is long, parts of it may not be shown in somescreens.When the image does not match the screen sizeof the TV, you can enlarge the image to fill thescreen.1 Press [OPTION].2 Select “Aspect”, then press [OK].3 Select the item, then press [OK].Normal:Normal outputSide cut:The black bars on the right and left sides ofthe 16:9 image disappear and the image isenlarged.Zoom:The black bars on the top and bottom sidesof the 4:3 image disappear and the image isenlarged.• This function does not work when watching 3D programmeand playing back 3D title or 3D photo.• It may also be adjusted using the screen mode of the TVetc.• The screen mode is switched to “Normal” in the followingsituations:- when you change the channel- when you start or end the playback of a title- when you switch the unit on or to standby mode.• [BD-V] [DVD-V] “Side cut” does not have any effect.• When “TV Aspect” (> 88) is set to “Pan & Scan” or“Letterbox”, the “Zoom” effect is disabled.The HOLD function deactivates all buttons on theunit and remote control.Press and hold [OK] and [RETURN ]simultaneously until “X HOLD” appears on theunit’s display.To cancel the HOLD functionPress and hold [OK] and [RETURN ]simultaneously until “X HOLD” disappears.Entering text1 Press [7] tomove to theseventh row.2 Press [7] twiceto highlight “R”.3 Press [OK]._Enter Title NameSpaceSetDeleteTop Menu Preview( DVD-Video )OKRETURNName field: shows the text you haveenterede.g.,568N OJ K LMP Q RT U V77 qrsp7 qrsp7 qrspSwitching the aspect ratio of thescreenHOLD functionUnit’s display