Panasonic DMR-BW880 Operating Instructions Manual

Also see for Diga DMR-BW880: Operating instructions Operating instructions Operating instructions

Contents

With Other EquipmentVQT2X3760Recording from external equipment≥Turn off the unit and other video equipment beforeconnecting.e.g., Connecting to the AV2 IN or DV IN terminals on thefront§ Connect to terminals of the same colour.When recording from the unit’s DV terminal≥Select the audio type in “Audio Type for DV Input” (> 79).≥When recording from DV equipment (e.g., digital videocamcorder), you can record audio/video recordings fromthe DV tape only.≥ The video quality will be degraded.≥ While copying from DV input or executing the “Flexible Recording via AVinput” (> 61)– Copy will stop when timer recording starts.– Simultaneous rec and play, switching of input cannot be performed.Recording disc: [HDD]Recording mode: XP, SP, LP, EP1 While stoppedPress [INPUT SELECT] to select the inputchannel.e.g., If you have connected to AV2 terminals, select“AV2”.2 Press [REC MODE] to select the recordingmode.3 Start play on the connected equipment.4 Press [¥ REC].Recording starts.5 Set the time to record (> 24, step ).To skip unwanted partsPress [;] to pause recording.≥Press again to restart recording.To stop recordingPress [∫].Recording from videoequipmentDV INL/MONO-AUDIO-RVIDEOAV2 INAudio/Videocable§This unitOther video equipmentConnect to Audio/Videooutput terminals.DV cable(IEEE 1394,4-pin)Manual recording