Convenient functionsVQT2J6567When “DLNA Function” is deactivatedmake the following settings.1 While stoppedPress [FUNCTION MENU].2 Select “Others”, then press [OK].3 Select “Setup”, then press [OK].4 Select “Network”, then press [OK].5 Select “Network Settings”, then press [OK].6 Select “Home Network ( DLNA ) Settings”, thenpress [OK].7 Select “Home Network ( DLNA ) function”, thenpress [OK].8 Select “On”, then press [OK].≥“Power Save in Standby” in the Setup is set to“Off”. (> 84)9 Select “Registration type for remote devices”, thenpress [OK].: Select “Automatic” or “Manual”, then press [OK].To register equipment manuallyAfter selecting “Manual” in step : (> left)1 Select “Named devices” or “Unnamed devices”,then press [OK].2 Named devicesSelect “Add new device” then press [OK].Unnamed devicesSelect the MAC Address for the connectedequipment, then press [OK].3 Select “Yes”, then press [OK].4 Access this unit from the connected DLNAcompatible equipment within 10 minutes.To deregister equipmentAfter selecting “Manual” in step : (> left)1 Select “Named devices” or “Unnamed devices”,then press [OK].2 Select the equipment, then press [OK].3 Select “Yes”.To set the name of this unit for displaying on theconnected equipmentAfter performing step 8 (> left)1 Select “Setting device name”, then press [OK].2 Select “Select from a preset list” or “Create name”,then press [OK].3 Select from a preset listSelect the preset name, then press [OK].4 Create nameEnter the name. (> 74, Entering text)Automatic All connected devices on thesame network can access thisunit.4 Panasonic DLNA compatibleequipment and 12 Non-Panasonic DLNA compatibleequipment will be automaticallyregistered.≥Equipment registered earliestwill be deregistered when the5th Panasonic DLNA compatibleequipment or 13th Non-Panasonic DLNA compatibleequipment is connected to thisunit.≥Ensure that the router for yourhome network has adequatesecurity system to preventunauthorized access.Manual Select the devices to register.(> right, To register equipmentmanually)RETURNHome Network (DLNA) SettingsOKOnAutomaticHome Network (DLNA) functionSetting device nameRegistration type for remote devicesNamed devicesUnnamed devicesNameddevicesFour Panasonic DLNAcompatible equipment can beregistered.≥Even if it is Panasonicequipment, you may not be ableto register from “Nameddevices”. In this case select“Unnamed devices”.Unnameddevices12 non-Panasonic DLNAcompatible equipment can beregistered.