Panasonic DMP-BDT375 Operating Instructions Manual

Also see for DMP-BDT370: Basic operating instructions Basic operating instructions

Panasonic DMP-BDT375 Operating Instructions Manual Manual pdf 24 page image

- 24 -SettingsSetup menuChange the unit’s settings if necessary. Thesettings remain intact even if you switch the unitto standby.Some items are common to the Option menu. Youcan get the same effect with both menus.1 Press [HOME].2 Press [OK] to select “Setup”.3 Select “Player Settings”.4 Select an item and change the settings.To exit the screenPress [HOME].∫ Picture Mode (> 23)∫ Picture Adjustment (> 23)∫ HDMI OutputPress [OK] to show the following settings:¾HDMI Video FormatThe items supported by the connected devicesare indicated on the screen as “¢”. When anyitem without “¢” is selected, the images may bedistorted.≥ If “Automatic” is selected, the best suitedoutput resolution to the connected TV isautomatically selected.≥ To enjoy high-definition video up-converted to1080p, you need to connect the unit directlyto 1080p compatible HDTV (High DefinitionTV). If this unit is connected to an HDTVthrough other equipment, the other equipmentmust also be 1080p compatible.¾HDMI Colour ModeThis setting is for selecting colour-spaceconversion of the image signal.¾Deep Colour OutputThis setting is for selecting whether to use DeepColour Output when a TV that supports DeepColour is connected.¾Contents Type FlagDepending on the playback content, the TV willoutput adjusting to the optimal method when aTV that supports this function is connected.∫ Dynamic Range CompressionYou can listen at low volumes but still heardialogue clearly.(Dolby Digital, Dolby Digital Plus and DolbyTrueHD only)PictureOKRETURNPlayer SettingsSystemRatingsNetworkLanguage3DSoundPictureHDMI OutputPicture AdjustmentPicture Mode Normal¾24p(4K)/24p OutputThis setting is for selecting the output methodfor content recorded in 24p* 1, such as movies.24p(4K) Outputs signals by upconvertingthem to 4K* 2.24p Outputs in 24p.≥ Connect the compatible TV for each (4K or1080/24p) output to the HDMI AV OUTterminal of this unit.≥ “24p(4K)” works only when playing back in2D.≥ When playing DVD-Video, set this setting to“24p(4K)” or “24p”, and then “24p” in “PictureSettings” (> 23) to “On”.≥ When BD-Video/DVD-Video images otherthan 24p are played, images are output at60p.*1 A progressive image recorded at a rate of 24 frames persecond (motion-picture film). Many BD-Video moviecontents are recorded in 24 frames/second inaccordance with the film materials.*2 A high resolution image/display technology ofapproximately 4000 (width) k 2000 (height) pixels.Sound≥ “Automatic” is effective only when playingDolby TrueHD.