Panasonic DMP-BDT320 Operating Instructions Manual

Also see for DMP-BDT320: Owner's manual Operating instructions Basic operating instructions

Connections and settings15VQT3V73STEP 6 : Reprogrammingthe remote controlIf you have more than one Panasonic player/recorder and the remote control operates bothproducts at once, you will need to change theremote control code to prevent this occurrence.(> 34, “Remote Control”)Smart eco-sensorThis mode will decrease the power consumptionwhen the unit is in standby mode and the sensordoes not detect people close by.PreparationSet “Quick Start” to “On (Smart eco-sensor)”(> 34).Sensor detection range image and operationof the unitA Sensor detection range (at i20eC) :Within a distance of approx. 5 m and anangle of 20e up and down and 30e left andright from the unit≥ The power consumption is minimal whenpeople are out of the detection range formore than 30 minutes.≥ The following will occur when there is amovement within the detection range, suchas someone walking into the room wherethis unit is placed.– Speed of startup from the standby modewill increase.– Idle power consumption will increase.(About the power consumption > 42)B The slot-in LED will light up when there is amovement in immediate proximity of this unit,such as inserting a disc.≥ This function does not work under the followingconditions.– For about 1 minute after connecting the AC mains lead.– The unit is placed in a glass-fronted cabinet.≥ The detection sensitivity may be reduced under thefollowing conditions.– The room temperature is close to the body temperature.– The unit is exposed to direct sunlight or close to heatingappliances.– People are approaching straight to the unit.– Other than listed above, temperature change or someinterference, etc., can affect the detection sensitivity.