Panasonic DMC-TZ40 Wi-fi Connection Manual

Also see for Lumix DMC-TZ40: Operating instructions Specifications Basic operating instructions Basic operating instructions

Digital CameraModel No. DMC-TZ40 / DMC-ZS30VQC9329Wi-Fi® connection guideLinking with the Wi-Fi compatible equipment allows you to remotelyoperate the camera, or share pictures with people in distant places evenduring recording or playing back.You can remotely operate the camerausing a smartphone/tablet. You need toinstall “Image App” on your smartphone/tablet.[Remote Shooting]By linking with the DLNA compatible TV,you can display pictures on TV right aftertaking them or display them on TV later byplaying them back on the camera.[Playback on TV]Every time you take a picture, the picturecan be automatically sent to a specifiedlocation. You can play back the picture onthe smartphone/tablet, or save and edit iton PC.[Send Images While Recording]You can select and send recordedimages.[Send Images Stored in the Camera]For details, refer to “Operating Instructions for advanced features”.The camera cannot be used to connect to a public wireless LANconnection.■About the Wi-Fi connection lampWi-Fi connection lampLit blue: The Wi-Fi connection is on standbyBlinking blue: Sending/receiving datathrough the Wi-Fi connection●We strongly recommend that you set an encryption to maintaininformation security.●When sending images on a mobile network, high packetcommunication fees may be incurred depending on the details of yourcontract.●Do not remove the memory card or battery or move to an areawithout any reception while sending images.●“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” aremarks or registered marks of the Wi-Fi Alliance.[Airplane Mode]Electromagnetic waves from the camera can affect instruments andmeters. In airplane cabins or in other restricted areas, set [AirplaneMode] to [ON].Press [MENU/SET]Press to select [Setup] and press [MENU/SET]Press to select [Airplane Mode] and press [MENU/SET]Press to select [ON] and press [MENU/SET]The operation to connect this unit to other devices by Wi-Fi differs by function, connection method, etc. Perform operation by following the screen display andrefer to the manual, etc. for the connecting device or WEB service.Preparation: You may be required to configure settings on applicable devices depending on the connecting device or WEB service.1 Press [Wi-Fi] button2 Press toselect the item andpress [MENU/SET]• You can also select it by touchoperations.[New Connection]: Configure settings for a new Wi-Fi connection with Wi-Fi compatible devices or WEB services. ([Remote Shooting] / [Playbackon TV] / [Send Images While Recording] / [Send Images Stored in the Camera])[History Connection]: Connect to compatible devices or WEB services using the same setting as before when connecting with Wi-Fi.[Favorite Connection]: You can register frequently used connection settings.[Wi-Fi Setup]: Configure various Wi-Fi settings.3 Connect to Wi-FiCamera Smartphone/tablet Camera Wireless accesspointCompatible devices, etc.,on network Camera Wi-Fi compatibledevices[Remote Shooting] (see below) [Via Network] (see reverse side) [Direct] (see reverse side)Sequence of connecting operationThis section describes how to make a Wi-Fi connection between this unitand a smartphone/tablet to record pictures using the smartphone/tabletand to transfer pictures to the smartphone/tablet.1 Installing “Panasonic Image App”The “Panasonic Image App” is an application provided by Panasonic thatallows your smartphone/tablet to perform the following operations of aWi-Fi-compatible LUMIX. (“Panasonic Image App” is indicated as “ImageApp” in the text.)■ Version1.2 or above■ Supported OSAndroid 2.2 - Android 4.2iOS 4.3 - iOS 6.0■ Installation procedureConnect your smartphone/tablet to the Internet, andplease install “Panasonic Image App” from the followingsite.• “Google Play™ Store” (for Android)• “App StoreSM” (for iOS)In the search field of each site, search by entering“Panasonic Image App” to find it quickly.●The service may not be able to be used properly depending on thetype of smartphone/tablet being used. For compatible devices,see the following support site.http://panasonic.jp/support/global/cs/dsc/(This site is available in English only.)●Android and Google Play are trademarks or registered trademarks ofGoogle Inc.●App Store is a service mark of Apple Inc.Recording/viewing pictures with a smartphone/tablet [Remote Shooting]2 Easily connect to a smartphone/tabletUse the NFC (Near Field Communication) function to easily connect thisunit to a smartphone/tablet with Wi-Fi for remote recording and to sendpictures to the smartphone/tablet.• This function can be used with NFC compatible devices with Android(2.3.3 or above). (Not available in certain models)1 Start up “Image App” on your smartphone/tablet2 Place your smartphone/tablet to the side of thisunitPlace over this area(within 5 mm (0.20 inch))• Do not bump your smartphone/tablet strongly against this unit.(The smartphone/tablet or this unit may get scratched)• For information on how to use NFC compatible devices, pleasecontact the device manufacturer.• If there is no immediate reaction, slightly move the position wherethe smartphone/tablet was placed.3 Press to select [Yes] and press [MENU/SET]4 Place your smartphone/tablet over this area of theunit again• When the connection is complete, live images captured by thecamera will be displayed on your smartphone/tablet.• Smartphone/tablet that have already been approved to connectcan connect by performing the operations in step 1 and 2 .When manually connecting without the NFC function■ Operating this unitPress the [Wi-Fi] buttonUse to select [New Connection] and press[MENU/SET]Use to select [Remote Shooting] and press [MENU/SET]■ On your smartphone/tabletSelect the SSID displayed on the camera, and enter thepassword• The SSID displayed differs depending on the connectionmethod.• To connect [Via Network], select a wireless access point andadjust the settings.Start up “Image App”• When the connection is complete, live images captured by thecamera will be displayed on the “Image App” screen.3 Taking pictures / Playing back pictures■Taking pictures via a smartphone/tablet(remote recording)Select [ ] on a smartphone/tablet■Playing back pictures in the cameraSelect [ ] on a smartphone/tablet●Read the [Help] in the “Image App” menu for further details on how tooperate.●The screen differs depending on the operating system.Transferring a still picture easily to your smartphone/tabletWhen transferring just 1 still picture to your smartphone/tablet with “Image App” installed, you can use the NFC function to easily send the picture.Start up “Image App” on your smartphone/tabletDisplay the still picture to be transferredto your smartphone/tablet on the 1-picturescreen (full screen)Place your smartphone/tablet to the side ofthis unit

/ 2

Related manuals for Panasonic Lumix DMC-TZ40