Panasonic DMC-FX35 Operating Instructions Manual

Also see for Lumix DMC-FX35: Operating instructions Instrucciones básicas de funcionamiento Operating instructions

- 87 -Advanced (Recording pictures)Note• When the burst mode setting is set to Unlimited– The burst speed becomes slower halfway. The exact timing of this depends on the type ofcard, the picture size and the quality.– You can take pictures until the capacity of the built-in memory or the card is full.• The focus is fixed when the first picture is taken.• When the burst speed is set to [˜], the exposure and white balance are fixed at the settingsused for the first picture for the subsequent pictures as well. When the burst speed is set to[ò], they are adjusted each time you take a picture.• When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.• If you are following a moving subject while taking pictures in a place (landscape) indoors,outdoors etc. where there is a large difference between the light and shade, it may take timeuntil the exposure is stable. If burst is used at this time, the exposure may not become optimal.• The burst speed (pictures/second) may become slower depending on the recordingenvironment such as in dark places, if the ISO sensitivity is high etc.• Burst mode is not cancelled when the camera is switched off.• If you take pictures in burst mode with the built-in memory, it will take time to write the picturedata.• [Œ] is set for the flash when burst is set.• Auto bracket is cancelled when burst is set.For details on [REC] mode menu settings, refer to P24.Contrast and exposure will be adjusted automatically when there is a big difference inbrightness between the background and subject, to bring the image close to how you see.Applicable modes: ·[OFF]/[ON]Note• When [ON] is set, [ ] is displayed on the screen.• [SENSITIVITY] is changed to [AUTO] when [I.EXPOSURE] is set to [ON] while [SENSITIVITY]is set at [ISO100].For details on [REC] mode menu settings, refer to P24.This can enlarge subjects even more than the optical zoom or extra optical zoom.Applicable modes: ·¿n[OFF]/[ON]Note• Refer to P42 for details.• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [MODE 1].[I.EXPOSURE][DIGITAL ZOOM]