Panasonic DH-3MP1 Operating Instructions Manual

Also see for DH-3MP1: Operating instructions

- 16 -3. MAINTENANCE(2) Shower Head cleaning.1) Turn the Shower Plate anticlockwise and remove it from the Shower Headwith hand.2) Clean the Shower Plate's holes by using a soft brush from time to time.(Recommended once a week).Soft BrushRubber Packing ShowerHeadShower PlateTake care do not damage the holes of the Shower Plate during the cleaning.The Rubber Packing shall be set on the Shower Head before fixing back the Shower Plateto Shower Head. Do not remove other parts other than Shower Plate and Rubber Packing.CAUTION(3) Filter Unit Cleaning (Filter Unit is fixed to Filter Knob)Clean the Filter of the Filter Unit with water once a week.Clean the Filter Unit when hot water is not drawn normally.Dismantle, cleaning and assemble of Filter UnitClose the Main Water Valve. Turn Water Volume Knob clockwise if it is blocking the Filter Knob.Turn the Filter Knob anticlockwise and pull it out.Clean the Filter Unit.Please make sure the O Ring is not removed and shall be free fromforeign particle to avoid water leaking.CAUTIONInsert the Filter Unit and tighten it properly (clockwise).Turn the Water Volume Knob to its original positionbase on Water Flow Rate Adjustment at page 15.Filter UnitOPENCLOSEFILTERCLEANINGO RingMain Volume KnobFilter KnobWater Volume KnobSwitch “OFF” the Miniature Circuit Breaker (MCB)before service.WARNING(1) Main Body cleaning.Be sure to switch “OFF” the Miniature Circuit Breaker beforehand.1) Clean it with moist cloth.2) Never use benzene, thinner, detergent, bleach, etc.3) Do not spray water to the unit, not put wet towels on it.4) Make sure to use suitable cloth to clean the Front Plate surfaceto avoid scratch.