Attendant Features Attendant-Controlled Text AssignmentRevised April 2000 DBS 824-3.0/3.2-700 2-7• On DSS consoles equipped with DSS keys, the indicator for an extensionthat has Absence Message, Call Forwarding, or DND activated lightsgreen. This indicator goes off when the feature is canceled. The indicatordoes not light for Permanent Call Forwarding.Attendant-Controlled Text Assignment(CPC-S and CPC-M)DescriptionThe attendant can assign text to extensions, system speed dial numbers, andCall Waiting/OHVA text replies without using a DSS/72 or entering theprogramming mode.Text is assigned through the dial pad on the attendant phone.OperationTo assign names to extensions:1. Pick up the receiver or press the ON/OFF key.2. Press PROG.3. Dial #2.4. Enter the extension’s port number.5. Press AUTO to backspace and erase the existing name.6. Use the dialpad sequences shown in Table 2-1 on page 2-8 to enter lettersand/or numbers.Press FLASH after each letter.Press CONF to switch between numbers and letters.7. To store your entry, press HOLD.To assign names to System Speed Dial numbers:1. Pick up the receiver or press the ON/OFF key.2. Press PROG.
