Panasonic CZ-RWSK2 Quick Reference

Also see for CZ-RWSC3: Installation instructions Operating instructions Operating instructions Quick reference Operating instructions

Contents

8Stop: Press .When the unit is stopped with the remote controller, the fan on the outdoor unit may continueto run for a while, even though the compressor of the outdoor unit stops.If the unit is not heating very effectively with a Low fan speed , switch the fanspeed to High or Medium .Depending on the indoor unit being used, it may indicate a function that it does not have. (The fanspeed is constant.)If you cannot turn the air conditioner off in the normal wayDisconnect the power to the indoor unit and contact the distributor where the product waspurchased.Only when identical refrigerant system inside all the indoor units or cooling/heating free-type areunder control as one group. It heats or cools automatically via the differences between the settemperature and the room temperature.• Depending on the indoor unit used, the remote controller may have a [Dry] indicator on itsdisplay even though the unit does not have the Dry function. (Same as cooler operation)• When the room temperature approaches the temperature setting, the unit continues to start upor stop automatically.• When the drying mode stops operating, the indoor unit’s fan blows a gentle breeze in order tokeep the moisture from returning to the room at a minimum.• Depending on the indoor unit used, and/or the temperature in the room, the fan speed may notbe adjustable.• Depending on the unit used, when the outside air temperature is 15 °C or less, the dry functionwill not operate.Operation (Cont.)