Panasonic CX-DH801W Operating Instructions Manual

Contents

SOURCESELVOLSOURCE1 2 3 4 DR COMP POSI SPC DIMMUTEAC300super bright multi-color display & 30w Power Amplifier for Center SpeakerDIGITALPRO LOGICDIGATAL SURROUND PROCESSORPOSITIONDIMMERSPACEPWRLL LR RRACCBATTERY 5ACENTERAMP-CONT MAX 0.1AVTR INACCACCHAM4X5mmMAXBCVH.AHC V.A.BVBCBATTERY 5APARKING BRAKEVIDEO-CNTCH/AUX INPRE-OUT FRONTVIDEO OUTREMOTE-IN53CX-DH801W52 English52 CX-DH801WElectrical Connection (Continued)51 English Connection with Digital Surround Processor (CY-AC300, option) and Power Amplifiers (option).Note: Refer to the operating instructions for the connected devices, in addition.Connection with Digital Surround Processor (CY-AC300)Digital Surround ProcessorCY-AC300 (option)DVD ChangerCX-DH801W (rear)External PowerAmplifier(option)External PowerAmplifier(option)*Battery LeadTo the car battery,continuous +12 V DCCenter Speaker CordExternalAmplifierControl PowerLead(Blue/white stripe)(Connect to AMP-CONT)Center SpeakerEAB-CF2(option) Sub-Woofer(option)LeftSpeaker(Rear)* For use as a monaural amplifier (Bridge connection)RightSpeaker(Rear)LeftSpeaker(Front)RightSpeaker(Front)ACC (or IGN) Power LeadTo ACC power,+12 V DCAmplifier ControlPower Lead(Blue/white stripe)Amplifier Control Power Lead(Blue/white stripe)Ground LeadTo a clean, bare metallic part of thecar chassisOperating Unit/Main UnitConnecting DIN Cord(Supplied with CY-AC300)SUB•W (MONO)ANALOG-INDIGITAL-INOptical Fiber Cable(CA-LRD60, option)(R) (R) (R)(L) (L)(L)(L) (L)(R) (R)REARFRONTCY-AC300Main Unit (Rear)PowerConnector(Supplied withCY-AC300)RCA Cable (option)RCA Cable(option)(Front)(Black)Resistor (220 Ω) (When a Y-shapedcord is used)Fuse (5 A)(Yellow)(Black/green stripe)(Black)(Red)Note on handling optical fiber cable:¡Do not allow the cable to be damaged by getting it caught in the door,placing a heavy object on it, etc.¡Make sure that the cable is not strained when it is connected.¡Do not bend the cable sharply.¡Install the DVD changer in where it prevents the optical fiber connectorfrom hitting its surroundings.25 mm or moreDVD ChangerCX-DH801W (Left)Extension Cord u(BRAKE/VIDEO-CONT/ACC/BATT/DIN/RCA/GND)GroundLeadTo a clean, bare metallic part of thecar chassisPowerLead Not used. Do not connect the Power Lead(ACC) if the control unit is equipped.Battery LeadTo the car battery, continuous + 12 V DC.(Black)(Red)(Yellow)Parking Brake Lead(Blue/yellow stripe)Display UnitCY-VM1500EX(option)Control UnitCY-VM1500EX(option)Be sure to wire the parking brakefor safety and preventing accident.Video control Lead (output)(Green/yellow stripe) Not used.RCA CableAudio OutputFuse 5AElectrical ConnectionNot used.(L) (R)RCA Cable(option)(R) (Red)(L) (White) Pre-out (Front)(option)Video Output (Yellow)CQ-VD7001W(option)DIN Cable (Black)To the changerconnector.DIN ConnectorAudio Output (L) (White)Audio Output (R) (Red)(R) (Red)(L) (White) Changer Input Connector(Yellow) Video Input TerminalRCA Cable (option)Remote-out(Black)RCA Cable(option)Video OutputTerminal(R) (Red) (L) (White)(Yellow)(R) (Red)(Yellow)(L) (White)Note: Select [VTR] in [CH INPUT] of the [INPUT/OUTPUT] menu in advance if you would like to watch the display of theDVD changer with CQ-VD7001W (a page 7).Note: Never use both Remote-Ins(one is mini-pin jack, the other is RCAjack) at the same time. Failure toobserve this may cause misoperation.Remote-In(RCA) (Black)

/ 27

Related manuals for Panasonic CX-DH801W