Panasonic CT32SX30E - DTV Operating Instructions Manual

Also see for CT-32SX30: User guide Operating instructions

Panasonic CT32SX30E - DTV Operating Instructions Manual Manual pdf 10 page image

9I NSTALLATIONAdditional Equipment ConnectionsPush to open the front panel of the television to use the Audio/Video input jacks for optionalequipment. Press the TV/VIDEO button to select VIDEO 4 input mode.A second VCR, a video disc player, video game equipment and DSS equipment can also beconnected to the video inputs. See the optional equipment manual for details.Procedure1. Connect equipment to rear or front Audio/Video input jacks.2. Select the corresponding video input by pressing TV/VIDEO button.3. Operate optional equipment as instructed in equipment manual.Note: The S-VIDEO connection provides higher quality picture. It overrides otherVIDEO connections. Use INPUT 4, AUDIO L and R with S-VIDEOconnection.IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES,COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.The extended use of fixed image program material can cause a permanent “shadow image” onthe picture tube. This background image is viewable on normal programs in the form of astationary fixed image. This type of irreversible picture tube deterioration can be limited byobserving the following steps:A. Reduce the brightness/contrast setting to a minimum viewing level.B. Do not display the fixed image for extended periods of time.C. Turn the power off when not in actual use.Note: The marking or retained image on the picture tube resulting from fixed imageuse is not an operating defect and as such is not covered by Warranty. Thisproduct is not designed to display fixed image patterns for extended periodsof time.Amplifier Connection (TO AUDIO AMP)To listen through a separate stereo system, connect an external audio amplifier TO AUDIOAMP outputs on back of television.Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.Audio Adjustments1. Select SPEAKERS ON located in the onscreen AUDIO menu.2. Set amplifier volume to minimum.3. Adjust television volume to desired level.4. Adjust amplifier volume to match the television.5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.6. Volume, mute, bass, treble and balance are now controlled through the television.Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functionsthrough the external amplifier.CONNECTIONS ON FRONT OF TVINPUT 4S-VIDEO VIDEO L-AUDIO-RHPJACTION TV/VIDEOp CHANNEL qt VOLUME uJack used for 1/8”headphone plug0338E Prod.fm Page 9 Wednesday, February 7, 2001 11:07 AM