Picture In Picture (PIP) OperationPICTURE IN PICTURE (PIP) OPERATIONWith I Without A VCR And Cable BoxThis television includes a two tuner Picture In Picture (PIP) feature. This allows watching'_o-(2) live broadcasts at the same time without or with an external video source (VCR).Without A VCR (External Video Source)Procedure• Connect incoming cable to antenna (ANT) input on back of TV.• Press the PIP button on the Remote Control to display the PIP frame.Note: The audio is for the Main Picture, only.• - Choose. channels for the PiP frame by pressing the Remote Control PIPCHANNEL up/down buttons.• Choose channels for the Main Picture by pressing the Remote Control CHup/down buttons or by using the numedc keypad.With A VCR (External Video Source) And Cable BoxConnectyourtelevisionto a VCR and CableBox,as shown.TERMINALS ON BACK OF TV VCR CABLEBOXIncomingCableCable Splitter(Not Supplied)CABLES NOT SUPPLIEDNote: The Remote Control must be programmed with supp/ied codes to operate the VCRand Cab/e Box. See Programming the Remote Control in the Remote Control QuickReference Guide.ProcedureNote:Press the PIP button on the Remote Control to display the PIP frame.Note: Theaudiois fromthe Main Picture only. iTo view scrambled channels through your Cable Box in the PIP frame:• Press the W/VIDEO button on the Remote Control to select the same videoinput which your cable box is connected to.• Verify the CABLE'BOX and VCR are ON and the VCR tuned to channel 3.• Choose channels for the PiP frame by pressing the CBL button on the RemoteControl and using the numeric keypad or CH up/down buttons.• Choose channels for the Main Picture by pressing the TV button on the RemoteControl and using the numeric keypad or CH up/down buttons.TheSWAP button switchesthe PIP and MainPicturesource. Press the RECALL button forPiPandMain Picture sourcestatus, on screen.El