Panasonic CT-G2966L Manual

Also see for CT-27G23: Operating manual Operating instructions

Contents

Panasonic CT-G2966L Manual Manual pdf 8 page image

PICTURE IN PICTURE (PIP) OPERATIONPIP Operation with a VCR - No Cable BoxThis television includes a Picture In Picture (PIP) feature. A second videosource (VCR) is required to provide a second picture.Connect yourtelevision to a VCR, as shown. (Some models have only onevideo input and some models have an S-VIDEO input.).IIIII AIIIncomil_gCable@CABLES NOT SUPPLIEDNote: The Remote Control must be programmed with the supplied codesto operate the VCR. See Programming the Remote Control in theRemote Control Quick Reference Guide.ProcedureTurn the VCR OFF and tune the TV to channel 3.Press the PIP button on the Remote Control to display the PIP frameon screen.Note: The PIf5 picture is the same as the Main picture, initially.• Press the TV/VIDEO button on the Remote Control to selectthe VIDEO PIP source.• Press the VCR button on the Remote Control and turn ONthe VCR.• Press the TM/MCR button on the Remote Control.• Choose channels for PIP frame by pressing VCRCHANNEL up/down buttons on the Remote Control.• Choose channels for the Main Picture by pressing the TMbutton on the Remote Control and using the numeric keypador CH up/down buttons.The SWAP button switches the PIP and MainPicture source, Press the RECALL button for PIPand Main Picture source status, on screen.E1