Panasonic CT-F2921L Operating Instructions Manual

Also see for CT-27SX11: Operating instructions

Contents

Panasonic CT-F2921L Operating Instructions Manual Manual pdf 11 page image

INSTALLA TIONVCR Connection(For models CT-27SX31/U, CT-32SX31/U, and CT-36SX31/U)Follow this diagram when connecting your television to a VCR only.Note: VIDEO 1input is a dual-purpose input. It is primarily intended for connectiowith 480i devices such as a DVD player using the Y PB PR component videjacks and Audio L & R jacks. However, it can also be connected tconventional composite video sources such as a VCR, using only the Y/Videjack and Audio L & R jacks. The on-screen label will display Component (Video 1 depending on which source is connected.CABLES NOT SUPPLtED,s-vDEe WDEO L AU[_OR HPJ1]ERMINALS ON FRONT OF _/Note: The remote control must be programmed with supplied codes to operate tlVCR. See Programming the Remote Control in the Remote Control QukReference Guide,Viewing a television programProcedure1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to the television program you want to view.Viewing a videoProcedureE3 Option A1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the W/VIDEO button on the remote control to select the video input (VIDEOVIDEO 2, etc.) connected to your VCR.3. Beginthe video.Z3 Option B1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Beginthe video.[]