Panasonic CT-36HX42 Operating Instructions Manual

Also see for CT-32HL42: Operating instructions Operating instructions Operating instruction

Contents

Panasonic CT-36HX42 Operating Instructions Manual Manual pdf 19 page image

R EMOTE C ONTROL O PERATION (MODELS CT-32HL42 AND CT-36HL42)17 lProgramming The RemoteThe Universal Remote Control can be programmed to operate many manufacturers’ components, using the componentfunction buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming yourRemote Control with or without a code for the component.Determine the manufacturer of the component and look in the table for the code.Programming With A CodeProcedure• Confirm that the external component is plugged and operating.• Turn the component off.• Press and together, for at least 5 seconds.• Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV,CABLE or DBS.• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).• Press the Remote Control to test the component. If the procedure was successful, the component willturn on.Programming Without A CodeThis procedure searches all codes and is called the “sequence method.”• Confirm that the external component is plugged in and on.• Turn the component off.• Press and together, for at least 5 seconds.• Press appropriate component button on the Remote Control.• Press VOL u to move forward to the next code. Press t VOL to move backward.• Press the Remote Control to test the component. If the procedure was successful, the component will turnon.Note: Repeat the above steps until the component code is found. It may take many attempts before the correct codeis found.• After the code is found, press to store the code.Default Modes For Remote ControlDevice Operates DefaultTV TV (Panasonic Only) Panasonic TV CodesDTV DTV (Panasonic Only) Panasonic DTV CodesCABLE CABLE (Preset) Panasonic CABLE CodesDBS DBS (Preset) Panasonic DBS CodesVCR VCR (Preset) Panasonic VCR CodesDVD/CD DVD and CD (Preset) Panasonic DVD CodesAUX Personal Video Recorders,Tape and VCR2 Panasonic Personal VideoRecorders CodeRCVR Audio Receiver (Preset) Panasonic RCVR CodeHelpful Hints: Unsuccessful CodeIf the component does not operate with the Remote Control, repeatthe procedure using another code. (Some brands have multiplecodes).If an incorrect code is entered, or if the procedure takes longer than30 seconds, the programming will fail.ACTIONPOWERPOWERACTIONPOWERPOWERACTION