Panasonic CT-36G33 Operating Instructions Manual

Also see for CT-27G33: Operating instructions Operating manual Operating instructions Operating instructions

Contents

Panasonic CT-36G33 Operating Instructions Manual Manual pdf 6 page image

PICTURE IN PICTURE (PIP) OPERATIONPicture In Picture (PIP) OperationWith / Without A VCR And Cable BoxThis television includes a two tuner Picture In Picture (PIP) feature. This allows watching two(2) live broadcasts at the same time without or with an external video source (VCR).Without A VCR (External Video Source)ProcedureConnect incoming cable to antenna (ANT) input on back of TV.Press the PIP button on the Remote Control to display the PIP frame.Note: The audio is for the Main Picture, onl FChoose channels for the PIP frame by pressing the Remote Control PIPCHANNEL up/down buttons.Choose channels for the Main Picture by pressing the Remote Control OHup/down buttons or by using the numeric keypad.With A VCR (External Video Source) And Cable BoxConnect your television to a VCR and Cable Box, as shown,TERMINALS ON BACK OF TV VCR CABLE BOX0 IIncomingCableCable Splitter(Not Supplied)CABLES NOT SUPPLIEDNote: The Remote Control must be programmed with suppfied codes to operate the VCRand Cable Box. See Programming the Remote Control in the Remote Control QuickReference Guide.ProcedurePress the PIP button on the Remote Control to display the PIP frame.Note: The audio is from the Main Picture only.Note:To view scrambled channels through your Cable Box in the PIP frame:Press the TVNIDEO button on the Remote Control to select the same videoinput which your cable box is connected to.Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.Choose channels for the PIP frame by pressing the CBL button on the RemoteControl and using the numeric keypad or CH up/down buttons.Choose channels for the Main Picture by pressing the TV button on the RemoteControl and using the numeric keypad or OH up/down buttons.The SWAP button switches the PIP and Main Picture source. Press the RECALL button for PIPand Main Picture source status, on screen.[]