Panasonic CT-36D32 Operating Instructions Manual

Also see for CT-27D32: Operating manual

Panasonic CT-36D32 Operating Instructions Manual Manual pdf 10 page image

OP_ONAL EQUIPMENT CONNECTIONS2 Tuner Picture in Picture (PIP) OperationPIP Operation with a VCR and a Cable BoxThis television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at thesame time without or with an external video source (VCR).Without a VGR (External Video Source)Procedure1. Connect incoming cable to antenna (ANT) input on back of TV.2. Press the PIP button on the Remote Control to display the PIP frame.Note: Audio is for the Main Picture (left) only.3. Choose channels for the PIP frame by pressing the Remote control PIP CHANNEL up/down buttons.4. Choose channels for the main Picture by pressing the Remote Control CH up/down buttons or by using the numeric keypad.With a VCR (External Video Source) and Cable BoxConnect your television to a VCR and Cable Box, as shown,CONNECTIONS ON BACK OF "IVCOMPONENT R-- AUDIO-- LVIDEO INPUTTO AUDIOup [ ® ®PR-- PB-- YNIDEO,.POT1 ® ® ®@CABLES NOT SUPPLIEDVCR CABLE BOXIncoming CableNote: The Remote Control must be programmed with supplied codes to operate the VCR and Cable Box.ProcedurePress the PIP button on the Remote Control to display the PIP frame.To view scrambled channels through your Cable Box in the PIP frame:1. Press the TVNIDEO button on the Remote Control to select the same video input to which your VCR is connected.2. Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.3. Choose channels for the PIP frame by pressing the CBL button on the Remote Control and using the numeric keypad or PIPCHANNEL up/down buttons.4. Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CHup/down buttons.Note: The SWAP button switches the on screen PIP and Main Picture source. Press the RECALL button for PiP and Main Picturesource status.8