8The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.Before you purchase any cables, be sure you know what type of output and input connectors your various componentsrequire. Also determine the length of cable you’ll need.InstallationReceiver LocationThis unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on thescreen.Use of some types of fluorescent lighting can reduce remote control transmitter range.Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.To insure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.Optional External EquipmentAC Power Supply CordCAUTION: To prevent electric shock, match wide blade of plug to wide slot of AC outlet and fully insert. Do not use this(polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent blade exposure.Please take safety precautions to prevent the unitfrom falling over.The unit may fall over during earthquakes, or ifsomeone stands on, or shakes, the TV.Safety PrecautionFixing to a wallUse a strong rope or a chain (notincluded) to fasten the TV firmlyto a strong support such as a wallor pillar.