I NSTALLATION5Optional Equipment ConnectionsVCRs, video disc players, video game equipment, and DSS equipment can also be connectedto the video inputs. See the optional equipment manual for details.Procedure1. Connect equipment as shown to front or rear Audio/Video input jacks .Note: Front and rear Audio/Video connectors cannot be operated at the same time.2. Select the Video mode by pressing TV/VIDEO button.3. Operate optional equipment as instructed in equipment manual.Note: If S-VIDEO and VIDEO input are used at the same time, two images willappear on the TV screen.IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES,COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.The extended use of fixed image program material can cause a permanent “shadow image” onthe picture tube. This background image is viewable on normal programs in the form of astationary fixed image. This type of irreversible picture tube deterioration can be limited byobserving the following steps:A. Reduce the brightness/contrast setting to a minimum viewing level.B. Do not display the fixed image for extended periods of time.C. Turn the power off when not in actual use.Note: The marking or retained image on the picture tube resulting from fixed imageuse is not an operating defect and as such is not covered by Warranty. Thisproduct is not designed to display fixed image patterns for extended periodsof time.CABLES NOT SUPPLIEDTERMINALS ON BACK OF TVVCRLRVIDEO OUTAUDIO OUTANT INANT OUTTO AUDIOAMPVIDEOS-VIDEOR LINPUT21AUDIOJack used for 1/ 8"headphone plug(some models)TERMINALS ON FRONT OF TV(SOME MODELS)VIDEO L AUDIO R0392Eproduction.fm Page 5 Monday, February 26, 2001 5:12 PM