Panasonic CT-31G30T Operating Instructions Manual

Panasonic CT-31G30T Operating Instructions Manual Manual pdf 10 page image

Control OperationPower Button - Pressthe POWER button to tumON. Press again to turn OFF.POWERChannel Change- (Twooptions)Option 1.Press the CHANNEL (CH) UP or DOWN button tosequentially scan through programmed channels(when On Screen Menus are not displayed).NOTE: TV/AUX/CABLE switch (located on Remote)must be set in TV position. "FVlAUX/CABLELocated On Remote ControlVolume Button - Press the VOLUME (VOL)LEFT or RIGHT button for desired listening level (whenOn Screen Menus are not displayed).Located On Remote ControlDecreasesVolume LevelIncreasesVolume LevelMute Button - Press the MUTE button to quicklyreduce sound level (Mute will appear on screen). Pressagain to restore sound.MUTEHelpful Hints:• Helpful information will display On Screen momen-tarilywhen Receiver is first turned on and when thechannel is changed.• When using keyboard entry for channels 10,11 and12 in the CABLE mode there is a slight delay beforechannel change because of the capability of tuningcable channels 100 to 125.• Ifyou do not receive channels above 13, confirm thetype of signal at ANT Input (TV or Cable) and set theTV or Cable Tuning Mode accordingly. (Refer to SetUp Feature, Antenna selection.)NOTE: If =SPEAKER OFF" is displayed On Screenafter pressing the VOLUME button, refer toAudio Menu to turn Speakers =ON"._ Selects Next___ Higher ChannelSelects Next / _=€=====T=======__Lower ChannelOption 2.Press two digits on keyboard (Example press 0,then 5 for channel 05). For channels over 99, pressthree digits on keyboard.1I@ @ ®1I1® ®1I(D ® ®1ILVCR Function Buttons - TheVCRFUNC-TIONbuttons have been designed to operate numerousbrands of VCRs. The infra-red code must be obtainedpriorto use. (Please refer to Programming the UniversalRemote for programming instructions.)NOTE: The "I'V/AUX/CABLE switch (located on Re-mote) must be in the AUX position (Center). TheVCR-LDP switch must be in the VCR position.TV/AUX/CABLEr-_VCR 1POWER RECORD IREW PLAY FF_-lr-_ F-_MOVE SIZE PIPTVNCR STOP PAUSE_E_E SW_VCR/LDP VCR CHANNEL ,-10-