Panasonic CT-27C8 Operating Instructions Manual

Also see for CT-25L8: Operating manual Operating instructions

Contents

Panasonic CT-27C8 Operating Instructions Manual Manual pdf 6 page image

OP_ONAL EQ_PMENT CONNEC_ONSOptional Equipment ConnectionsNote: The remote control must be programmed with suppliedcodes to operate the optional equipment (EUR7613Z10only).VCR ConnectionVCRs, video disc players, video game equipment, andDSS equipment can also be connected to the video inputs.See the optional equipment manual for more information.Note for models with Component video input:VIDEO 1 input is a dual-purpose input. It isprimarily intended for connection with 480i devicessuch as a DVD player using the Y PB PRcomponent video jacks and Audio L & R jacks.However, it can also be connected to conventionalcomposite video sources such as a VCR, usingonly the Y/Video jack and Audio L & R jacks. Theon-screen label will display Component or Video 1depending on which source is connected.CONt_ECTFONSOn BACK OF THE TV/_NPUTIR AUDIO L.......... © ©WDEO INPUTSI_ p. YNIDEC© © ©INPUT 2....... @ © ©R aUDIO • VgEOVIDEO OUT,_U_lO OUTN_T OUT ANTIN® ®Note: Rear A/V jacks diagram may vary, depending on modelPlease refer to the FEATURE CHART on page 2 for yourmodel's capabilities.ProcedureConnect equipment as shown to rear Audio/Video inputjacks.Select the Video mode by pressing TVNIDEO button.Operate optional equipment as instructed in equipmentmanual.Front Control PanelThe front control panel can be used to access menus andswitch video mode when the remote control is notavailable.Note: Front A/V jacks diagram may va_ depending on model.Please refer to the FEATURE CHART on page 2 for yourmodel capabilities.A second VCR, Camcorder, a video disc player, videogame equipment or DSS equipment can also be connectedto the vidoeo inputs. See the optional equipment manual.ProcedureConnect equipment to front Audio/Video input jacks.Select the Video mode by pressing TVNIDEO button.Operate optional equipment as instructed in equipmentmanual.Cable Box ConnectionFollow this diagram when connecting your television to aCable Box.FCONNECTIONS ON BACK OF THE TVrINPUT IR--AUDIO --LCOMPONENT@@VIDEO INPUTSI_pR-- P -- YIVIDEO© © ©INPUT 2voEo © © ©R__AUDIO --L V_DEOCABLES NOT SUPPLIEDNote: Rear A/V jacks diagram may va_ depending onmodel. Please refer to the FEATURE CHART on page2 for your model's capabilities.ProcedureTune the television to channel 3 or 4 depending on theRF out setting of the cable box.Using the cable box, tune to the premium cable channelyou want to view.Digital TV - Set-Top Box (DTV-STB) or DVDPlayer Connection (some models)Use this diagram to connect the Panasonic DTV-STB(Digital W-Set-Top Box) to the back of your TV.Note: Rear A/V jacks diagram may vary, depending on model.Please refer to the FEATURE CHART on page 2 foryour model's capabilities.Notes:There are three video jacks, Y, PB, and PR.Separate component color inputs provideluminance and color separation. Use the L (left)and R (right) audio inputs.Select DTV-STB to 480i output mode. TV set canreceive 480i signal only.4o