- 20 -Instructional Flow Chart for Service ModeFigure 16. Flow Chart for Service Mode.Place jumper across terminalson AG ConnectorAdj.needed?NORMAL MODEMomentarily short FA1 to FA2 ( ).Press Action + Volume Up Simultaneously (ON Receiver)Adj.needed?WHITESCREEN(ON REMOTE)RECALLWHITESCREENREDSCREENGRN.SCREENBLUESCREENPOWER(ON REMOTE)AGING MODE• Yellow “CHK” appears in upper left corner of screen.• Volume Up/Down operate rapidly.• Custumer Controls are set to nominal level.SERVICE MODE• “CHK” turns red.• Volume Up/Down operate normally.• Custumer Controls are set to nominal level.SUB-DATA ADJUSTMENTS.B ITEMS.QUICK ENTRY TO SERVICE MODE• Select CABLE Mode.• Set SLEEP time for 30, 60 or 90 Min.• Tune to Channel 124.• Adjust Volume to minimum.• Press VOL DOWN. On Receiver.EXITEXITNYNYC(ON REMOTE)RECALL Press Action and Power on the Receiversimultaneously for at least 2 seconds.ON REMOTE CONTROL TOSELECT ADJUSTMENTON REMOTE TO ADJUSTTHE LEVELCHVOL VOLPOWER(ON REMOTE)AIMPORTANTAlways Exit the Service ModeFollowing Adjustments.Place jumper across terminalson AG ConnectorRemove jumperfromAG Connector