Panasonic CT-20S11 Operating Instructions Manual

Panasonic CT-20S11 Operating Instructions Manual Manual pdf 8 page image

Control OperationPower - Press the POWER button to turn ON. Pressagain to turn OFF.POWERVolume - Pressthe VOLUME (VOL) LEFT or RIGHTbutton for desired listening level (while On Screen Menusare not displayed).Channel Change - (Twooptions)Option 1.Press the CHANNEL (CH) UP or DOWN button tosequentially scan through programmed channels(while On Screen Menus are not displayed).Located On Remote ControlSelects NextHigher ChannelLocated On Remote Controlr)ecreasesVolumeLevelIncreasesVolume LevelMute - Press the MUTE button to quickly reducesound level (Mute will appear on screen). Press again torestore sound.MUTESelects NextLower Channel=-==Option 2.Press two digits on keyboard (Example press 0, then5 for channel 05). For channels over 99, press threedigits on keyboard.1 2 3© © ©4 5 624 °9©oHelpful Hints:• Helpful information will display On Screenmomentarily when Receiver is first turned on andwhen the channel is changed.When using keyboard entry for channels 10, 11 and12 in the CABLE mode there is a slight delay beforechannel change because of the capability of tuningcable channels 100 to 125.If you do not receive channels above 13, confirm thetype of signal at ANT Input (TV or Cable) and set theTV or Cable Tuning Mode accordingly. (Refer toSet-Up Feature, Antenna selection.)TV/Video - Press the TV/VIDEO button onReceiver to select desired input.W/VIDEOSignal connected to:REAR VIDEO/AUDIOINPUT JACKSTV or CABLEVIDEOCH 02-8-