Panasonic CT-13R17B Owner's Manual

Also see for CT-13R17: Operating instructions

Contents

Panasonic CT-13R17B Owner's Manual Manual pdf 3 page image

1. EPJ (Earphone) Jack - Plug an earphone or monaural headphones with an 1/8 miniplug intothis jack for private listening.2. Remote Sensor - Signals from the Remote Control unit are received here.3. POWER - Press to turn the TV on or off.4. VOLUME / - Press to raise or lower the level of the sound. And also, press to select thedesired setting during On-Screen operations.5. CHANNEL s / t - Press to select a higher or lower numbered channel set into memory. Andalso, press to select the desired setting during On-Screen operations.6. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can beconnected here.NOTE:If needed customer can enter the OSD by pressing VOLUME and of the frontpanel at the same time.EPJ POWER VOLUMEACTIONCHANNEL VIDEO IN AUDIO INLOCATION OF CONTROLS CLOSED CAPTIONWHAT IS CLOSED CAPTIONING?This television has the capability to decode and display Closed Captioned television programs.Closed Captioning will display text on the screen for hearing impaired viewers or it willtranslate and display text in another language.TO VIEW CLOSED CAPTIONS• When activating the Closed Captioned Decoder, there will be a short delay before theClosed Captioned text appears on the screen.• Closed Captioned text is only displayed in locations where it is available.• If no caption signal is received, no captions will appear, but the television will remain inthe Caption Mode.• Misspellings or unusual characters may occasionally appear during Closed Captioning.This is normal with Closed Captioning, especially with live programs. This is becauseduring live programs, captions are also entered live. These transmissions do not allowtime for editing.• When Captions are being displayed, on-screen displays, such as volume and mute maynot be seen or may interfere with Closed Captions.• Some cable systems and copy protection systems may interfere with the ClosedCaptioned signal.• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decodermay not appear or may appear with strange characters or misspelled words. In this case,adjust the antenna for better reception or use an outdoor antenna.Press ACTION.Press t to select the LOCK mode, then press ACTION.Enter your password (4 digits) using Direct channel selection (0-9).In the event of entering an incorrect password, press or wait a few seconds to deletethe wrong password.Enter the same password for confirmation only for the first time.Press s or t to select the V-CHIP option, then press .Press or to select the ON, then press ACTION.Press s or t to select the TV RATING or MOVIE RATING option, then press .Press or to select the desired rating for the applicable video or TV channel, thenpress ACTION.158 Press ACTION twice.TV-YTV-Y7TV-G: all children: 7 years old and above: children’s programTV-PGTV-14TV-MA: parental guidance: 14 years old and above: 17 years old and above6When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to explain the rating.Press s or t to select the desired rating you want. Press to select the setting ON or OFF,then press ACTION.: all ages: parental guidance: parental guidancefor under 13 years oldGPGPG-13RNC-17XSETTING LOCKThis TV is fitted with a V-CHIP controller which provides you with channel viewing access controlsand restrictions. This function allows adult screening of TV programs based upon ratings.OFF TV-Y7 TV-G TV-14 TV-MATV–Y TV-PGTV RATING432MOVIE RATINGOFF PG PG-13 R NC-17 XG: Parental guidance for under 17years old: 17 years old and above: adult only741 2Press ACTION and press to select the SET UP mode,then press ACTION.Press s to select CC mode and then press , then press s or tto select desired Closed Caption (e.g. CAPTION CH1), then pressACTION.Press ACTION twice.312OFFCAPTION CH1CAPTION CH2TEXT CH1TEXT CH2/ACTION/Captions: This Closed Caption Mode will display text on the screen in English or anotherlanguage (depending on the setting of the Closed Captions ). Generally, Closed Captions inEnglish are transmitted on Captions Channel 1 and Closed Captions in other languages aretransmitted on Captions Channel 2.Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programmingschedule or other information. After selecting a Closed Caption Mode, it will stay in effect untilit is changed, even if the channel is changed. If the Captions signal is lost due to a commercialor a break in the signal, the Captions will reappear when the signal is received again. If thechannels are changed, the Captions will be delayed approximately 10 seconds.For television programs broadcasting with Closed Captions, look in your TV guide for theClosed Captions symbol (CC).NOTES:• If you forget your password, turn on the TV. Reduce the volume to a minium level. Press andhold VOLUME on the front of the TV and press the 0 button on the remote controlsimultaneously. Select the LOCK mode, then enter a new password.• If you want to change the password, follow steps 1-3 and select the "CHANGE PASSWORD"option then enter your new password.• The V-Chip function is activated only on programs and tapes that have the rating signal.• Once you block a program using the V-Chip function, the blocked program cannot be watchedbased on the content of the show. When the program starts, the "ENTER PASSWORD" willappear on the screen. When you want to release the V-Chip temporarily, enter the password.If you change the channel or turn off the TV while the V-Chip function was temporarilyreleased, the original setting will be resumed. If you return to the channel you were watchingyou must re-enter your password to temporarily release your V-Chip function again.• If you are changing channels using a VCR or a cable box, while the TV remains on channel3 or 4, the V-Chip operates differently. When you enter your password to temporarilyrelease the block on any channel, you have completely disabled the V-Chip function for allstations. To reset the V-Chip turn your TV off and back on.• Some cable boxes are built with a delay feature, in some cases it can take up to 10 secondsfor a program to appear after the password has been input.3 5 6CATV mode direct channel selectionWhen the TV/CATV menu option is in the CATV position, channels can be selected asfollows:NOTE:If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,but the Closed Caption text will not be affected by the language selection.To turn on the TV, press POWER.The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) or .The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.As the sound level increases, so do the number of BARS AND THE NUMBER on thescreen. The same is true for decreasing the level.Set the TV/CATV menu option to the appropriate position. When shipped from thefactory, this menu option is in the CATV setting. See "To Memorize Channels".NOTE: If the station being viewed stops broadcasting, the TV will automatically shut offafter 15 minutes.TV OPERATION12TV - VHF/UHF channelsCABLE - CABLE TV channels341-910-1213-99100-125Press "0" twice, then 1-9 as needed.Example, to select channel 2, press "002".Press "0", then remaining 2 digits.Example, to select channel 12, press "012".Press the 2 digits in order.Example, to select channel 36, press "36".Press the 3 digits in order.Example, to select channel 120, press "120".4SET UPLANGUAGE/IDIOMA/LANGUEMODEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: CABLE: OFF/ /PICTURELOCKEXITTIMERSET UPLANGUAGE/IDIOMA/LANGUEENGLISHESPAÑOLFRANCAIS/ACTION/Press ACTION.Press to select the SET UP mode, then press ACTION.Press and then press s or t to select desired language(e.g. English), then press ACTION.Press ACTION to select the EXIT mode, then pressACTION again.312SETTING LANGUAGECH (CHANNEL) s and tPress and release the CH (CHANNEL) s or t . The channel automatically stops at thenext channel set into memory. Press and hold the button down to change channels morequickly.For proper operation, before selecting channels, they should be set into the TV'smemory. See "To Memorize Channels".DIRECT CHANNEL SELECTION (0-9) - Press these buttons to select a channel.Thechannel number will appear on the upper right corner of the TV screen. If an invalidchannel number is selected, the display will revert to the previous channel.TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in theTV position, all channels can be instantly selected by using two buttons (For example, toselect channel 2, press "0", then "2". If you press only "2", channel selection will bedelayed for a few seconds). For channels 10 and above, press the 2 digits in order.This TV can display the channel number, on screen displays and picture adjustments on thescreen in English, Spanish or French.NOTE:All four arrows can be used to select the SET UP mode, not just .

/ 4

Related manuals for Panasonic CT-13R17