Panasonic CQ-C1300U Operating Instructions Manual

Also see for CQC1300U - AUTO RADIO/CD DECK: Operating instructions Operating instructions Service manual

Contents

28 CQ-C1300U CQ-C1300U 29Audio Settings[VOLUME "]: Up[VOLUME #]: DownNote:≥ Press [DISP] (display) to return to theregular mode.≥ If no operation takes place for more than7 seconds in audio setting (2 seconds inthe volume setting), the display returns tothe regular mode.≥ The volume can also be adjusted directlyusing [VOLUME] on the main unit.(page 17)≥ The effect of SQ can be adjusted bybass/treble adjustment. For some musicsources or at some volume levels, thesound quality is not desirable becausesound is distorted, or the effect is notsuffi cient because the BAS effect is limited.In such cases, turn down the sound volumeor readjust the bass/treble setting.≥ Please refer to page 17 for information onSQ setting.1 Press [VOLUME](SEL: select).VolumeDefault:18Setting range: 0 to 40Bass/TrebleYou can adjust the bass and treble sound.Default: BAS (bass) 0 dBTRE (treble) 0 dBSetting range: j12 dB to i12 dB (by 2 dB)Balance/FaderYou can adjust the sound balance among thefront, rear, right and left speakers.Default: BAL (balance) CNT (center)FAD (fader) CNT (center)Setting range: 15 levels each2 Turn [VOLUME].(Press [VOL "] or [VOL #]on the remote control unit.)[VOLUME "]: Increased[VOLUME #]: Decreased[VOLUME "]: Increased[VOLUME #]: Decreased[VOLUME "]: Right enhanced[VOLUME #]: Left enhanced[VOLUME "]: Front enhanced[VOLUME #]: Rear enhancedENGLISH15ENGLISH16(Push.)SelectSelectSelectSelectSelect[VOLUME "][VOLUME #]64975Car AudioSOURCEMUTEPOWERRANDVOL31 2DISPBANDREP6 5SETSEL#SCANMENUNUMBER80 [DISP](Display)[SEL](Select) [VOL "][VOL #]