Panasonic CQ-5100U Operating Instructions Manual

CQ-5100U16AUX (Auxiliary Input Mode)Connecting with the portable audio playerThe AUX input terminal is equipped on the front panel. This jack is used to connect a portable audio device using astandard mini-plug cable. By connecting a commercially available portable audio device, this unit can play the musicrecorded on the device.The AUX Input Example:Front AUX IN(3.5 mm ø stereo)3.5 mm ø stereo mini-plug cable (Option)Stereo line out(3.5 mm ø)Silicon audio player,HDD audio player etc.(Option)Caution• Set the volume level to low enough before the AUXconnection is completed. Failure to observe this maycause loud noise and, consequently, damage yourspeakers and your hearing.• Do not connect this AUX directly with a speaker/headphone output. Failure to observe this maydistort sound and break the internal amplifier.Notes:• When the high impedance output enuipment such asold type audio equipment with an output transformeris connected, sound may be distorted or becomeextremely low levels.• The connected audio equipment should be kept awayfrom the speakers.• Be sure that your hand does not catch and yank themini-plug cable.Warning¡ Do not place the connected portable audio device or mini-plug cable in a location where it will prevent theSRS airbag may not operate correctly or the portable audio device may be catapulted outward by thedeploying airbag, which may result in serious injury or death.*Refer to the owner's manual for your car regarding the deploying position of the SRS airbag.¡ Please or temporarily fix the portable audio device and mini-plug cable where they will not interfere thedriver when driving. Otherwise, they may interfere driving or cause auto accident.Before Using the Portable Audio DeviceMain UnitCQ-5100U