Panasonic CF-VDL03U Operating Instructions Manual

Contents

Panasonic CF-VDL03U Operating Instructions Manual Manual pdf 11 page image

11EHandling the TouchscreenDo not place any object on the surface or press down forcefully with sharp-pointed objects(e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens).Do not apply pressure within 5 mm of the perimeter of the display panel. The cursor maymove to the edge of the display.Do not operate the computer when such things as dust are on the screen, or allow contactwith substances that could dirty the touchscreen, such as oil. The cursor may not workproperly in such cases.When the touchscreen becomes dirty:Use a dry soft cloth such as a gauze to clean the dirty areas.Do not use benzene, thinner, or disinfectant- type alcohol.Configuring the TouchscreenWhen needed, the touchscreen can be configured using the following steps.1Click (Start) - [All Programs] - [Touch Panel Utility] - [Touch PanelSettings].Click (Start) - [All Programs] - [Touch Panel Utility] - [Touch PanelSettings].Click [start] - [All Programs] - [Touch Panel Utility] - [Touch Panel Settings].••The following screen will be displayed.AdvancedSet the advanced settings.CalibrationDefine the calibration setup.Use when the cursor can not bepointed correctly with the fingeror stylus. (Needed if the alignmentof the touchscreen with the visualimage change or adjust the displayresolution).DevicesConfigurethe device controller.VersionDisplay the version number of the touchscreendriver installed.OthersSet the selective suspend function and parameterssettings.SettingsSet the general settings andfunctions. (e.g. “double-click”settings)