Panasonic CF-C2 series Operating Instructions Manual

Also see for CF-C2 series: Operating instructions

Contents

Panasonic CF-C2 series Operating Instructions Manual Manual pdf 15 page image

15 Getting StartedChanging the Display ModeNOTE Do not press the tablet buttons, and do not change the display mode by holding the upper part of the display. Do not allow your fingers to get caught between the display and the base when changing the display mode. Do not allow the tether for the pen (included) or other cables to get caught between the display and the base whenchanging the display mode. If peripheral devices connected to the computer make it hard to change the display mode, disconnect the devicesand then change the display mode. Switching to the Tablet ModeA Lift up the display so it stands perpendicular to the body.B Slide the Display Rotation Lock (A) to the unlocked position.C Hold the bottom left and bottom right of the display, and rotate thedisplay in the direction of the arrow until it clicks.NOTE The display cannot be rotated more than 180 degrees in the direc-tion of the arrow, or in the opposite direction of the arrow. Do notattempt to rotate the display more than 180 degrees or in the oppo-site direction using force.D Close as the display faces up.NOTE Close the display completely and make sure there is no spacebetween the keyboard and the display; otherwise the computer willremain in Laptop Mode.A Switching to the Laptop ModeA Lift up the display so it stands perpendicular to the body.B Hold the bottom left and bottom right of the display, and rotate thedisplay in the direction of the arrow until it clicks.NOTE The display cannot be rotated more than 180 degrees in the direc-tion of the arrow, or in the opposite direction of the arrow. Do notattempt to rotate the display more than 180 degrees or in the oppo-site direction using force.C Slide the Display Rotation Lock (A) to the locked position.