Panasonic CF-48 Service Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Service Manual Manual pdf 45 page image

6 - 66.13. Removing the LED PCB, MAINPCB, VGA/CPU Heat Sink, Fan,I/O Plate and COM PCB.Figure 231. Remove the two screws

, and remove the LED PCB.2. Remove the four screws , and remove the FDD guideplate and the tilt support L.Screw

: DXSB26+4FZMTScrew : XTB26+8GFigure 243. Remove the screw and six hex. screws .4. Remove the main PCB section.Screw : DXSB26+4FZMTS crew : IKT0104AAFigure 255. Remove the shaft spacer and two screws , and removethe I/O plate.6. Remove the three H/Sink spacers and two screws ,and remove the CPU/VGA heat sink, CPU/VGA heat sinktop plate and CPU/VGA heat sink bottom plate.7. Remove the two screws , and remove the fan.Remove the two screws , and remove the COM PCB.Screw : XYN2+J6Screw : DXHM0009YAScrew : XYN25+J5FZScrew : DFHE5121YA