Panasonic CF-48 Series Operating Instructions Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Contents

Panasonic CF-48 Series Operating Instructions Manual Manual pdf 19 page image

19 OperationTouch PadLeft ButtonRight ButtonWork SurfaceFunctionUse the touch pad to move the cursor on the display and perform normal computer operations.orTwo quick taps, but on the sec-ond tap leaving your fingerdown (applying pressure) andmoving it on the work surface.While holding down the but-ton, moving your finger onthe work surface.orOperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingScrollorMove the tip of your fingerlightly over the surface.tapping clickingdouble-tapping double-clickingBesides the above operations, operations such as Zoom and Pan are possible by allocatingthese functions to the buttons and/or pad. For more details, refer to [Mouse Properties]*.* Windows 2000 : Select [Start] - [Settings] - [Control Panel] - [Mouse].Windows XP : Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].The operations of Scroll, Pan or Zoom will differ depending on the application. There arecases the touch pad will not support these operations even with an application that sup-ports the functions.Handling the Touch PadDo not place any object on the work surface or press down forcefully with sharp-pointedobjects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens).Try to avoid having any harmful substances such as oil, come in contact with the touch pad.The cursor may not work properly in such cases.When the touch pad becomes dirty:Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied withdetergent diluted with water and then thoroughly wrung.Do not use benzene or thinner, or rubbing alcohol. Doing so may adversely affect the sur-face, e.g., discoloration. In addition, do not use commercially-available household clean-ers and cosmetics, as they may contain components harmful to the surface.NOTE( Touch Pad)CAUTIONBy design the touch pad is to be used with a finger tip only. Therefore, do not use anyimplement which causes damage on the work surface.