Panasonic CF-31 Series Operating Instructions Manual

Also see for CF-31 Series: Supplementary instructions Operating instructions Operating instructions Reference manual Reference manual

Contents

Panasonic CF-31 Series Operating Instructions Manual Manual pdf 15 page image

15 Getting Startedz Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-count name) that includes the “@” mark, a password will be requested at thelog-on screen, even if no password has been set. If you try to log on without en-tering a password, “The user name or password is incorrect.” may be displayedand you will not be able to log on to Windows (Î page 24).z The wallpaper for the first logon user has already been preset on “5 Setup Win-dows.” .When using this computer under the Sun, the screen becomes easily viewableby changing the wallpaper to the white wallpaper.A Right-click on the desktop, and click [Personalize] - [Desktop Background].B Select [Solid Colors] at [Picture Location].C Select the white wallpaper and click [Save changes].z You cannot choose the following words for user name and password: CON,PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.z When you set date/time/time zone and click [Next], the screen may not go to thenext step for a few minutes. Do not touch the keyboard or touch pad, and waituntil the screen changes.z If “An unexpected error has occurred ...” (or a similar message) is displayed,click [OK]. This is not a malfunction.6 Perform the touchscreen calibration.z Before performing the calibration, close Tablet PC Input Panel.NOTEz At first, log on to Windows as an administrator and perform this calibration.A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-ting].B Click [Calibrate].C Using the stylus, touch each of the “+” target marks one by one, and thenclick [Yes].D Click [OK].NOTEz Perform the following calibration for each user.A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-ting].B Click [Calibrate].C Using the stylus, touch each of the “+” target marks one by one, and thenclick [Yes].D Click [OK].z Perform the calibration for the orientation to be used.A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch ScreenCalibration Utility].B Using the stylus, touch each of the 12 “+” target marks one by one until itblinks, and then press Enter.C Press Enter.