Panasonic CF-27 Series Operating Instructions Manual

Also see for CF-27 Series: Operating instructions User guide User guide Operating instructions Operating instructions

Contents

Panasonic CF-27 Series Operating Instructions Manual Manual pdf 10 page image

10 OperationLift up the latch with another finger.1 Open the displayStarting Up/Shutting DownStarting Up2 Turn your computer onPull the carry handle forward.Slide the power switch toward the rear of the computer and hold it for approximatelyone second until the power indicator turns on before releasing it.32If security indicator ( ) is displayed,you must first enter your password. ( "Security Measures")* If you are starting from the suspend mode ( "Suspend/Hiber-nation Functions"), if after three attempts the correct password is not in-put, or if no password is entered for about a minute, the computer returnsto the suspend mode.Over three incorrect attempts,If the correct password is input,Will StartWill Not Start*(Power off)Upon entering yourpassword and press-ing Enter .When an application or file that was previously displayed ap-pears on your screen,the suspend or hibernation function has been set. ( "Suspend/HibernationFunctions")4123Lift open the display.Power SwitchLatchCAUTIONThe computer will not power on when the display is closed (except when con-necting an external display).After confirming that the power indicator has turned on, avoid the followinguntil Windows has completed loading.• Touching the power switch.• Performing any keyboard or touch pad (or external mouse) operations.• Closing the display.If the display is closed while Windows is starting up, it is possible that color, etc.,will not be displayed properly. Run the [MS-DOS Prompt] ([Start] - [Programs]- [MS-DOS Prompt]), and use full screen display mode by pressing Alt +Enter .After returning from the full screen mode Alt + Enter again, the displaywill be shown correctly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.When the CPU temperature rises, the computer may not power on to prevent theCPU from overheating. Should this happen, allow the computer to cool downthen switch the power on again.If the computer still does not power on, please contact Panasonic TechnicalSupport.Slide the latch toward the rear of the computer and hold it with one finger.41