Panasonic CF-19 Series Reference Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

Panasonic CF-19 Series Reference Manual Manual pdf 41 page image

41USB Devices To connect the USB device1 Open the cover and connect the USB device to one of the USBports (A).For further information, refer to the instruction manual of the USB device. To remove the USB device1 Disable the USB device.A Double-click on the notification area and select the USB device, then click [Stop].B Follow the on-screen instructions.z This step is not necessary when;• Removing the device after turning off the computer.• is not displayed.• The device does not appear in the list in step A.2 Remove the USB device.NOTEz You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction man-ual of the USB device.z You may need to install the driver again when connecting the device to another port.z When a USB device is connected, standby and hibernation may not function normally. If the computer does not startup normally, remove the USB device and restart the computer.z When the USB device is removed and then inserted, may appear in the Device Manager and the device may not becorrectly recognized. In this case, remove and connect the device again.z When a USB device is connected, power consumption increases. Remove the USB device when it is not in use, espe-cially when operating by battery power.Connecting/Removing USB Devices